NSN 1007038PC25

An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes:items with more than one hole. See also insulator, disk; insulator, bead; insulator, bushing; and insulator, plate

hood, top opening w/clamp body style, copper alloy single mating end single contact grouping contact material, cable clamp connector cable strain relief method, jackscrew-socket connector locking method, 0.995 inches minimum and 1.005 inches maximum cable entrance diameter.

NSN 5935-00-847-3328 Datasheet

(NSN) National Stock Number

5935-00-847-3328

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-847-3328

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Fri, Jan 1, 1960

Schedule B Code

8536695050

Body Style

hood, top opening w/clamp

Cable Entrance Diameter

0.995 inches minimum and 1.005 inches maximum

Connector Cable Strain Relief Method

cable clamp

Connector Locking Method

jackscrew-socket

Contact Material

copper alloy single mating end single contact grouping

Contact Removability

nonremovable single mating end single contact grouping

Contact Maximum Ac Voltage Rating In Volts

750.0 single mating end single contact grouping

Contact Maximum Current Rating In Amps

5.0 single mating end single contact grouping

Contact Position Arrangement Style

25-104 single mating end

Contact Surface Treatment

gold and silver single mating end single contact grouping

Included Contact Quantity

104 single mating end single contact grouping

Included Contact Type

round socket single mating end single contact grouping

Insert Material Document And Classification

mil-m-19833,type gdi-30 mil spec single material response single mating end

Insert Material

plastic diallyl phthalate single mating end

Mating End Quantity

1

Nominal Thread Size

0.138 inches

Overall Height

2.932 inches nominal

Overall Width

1.172 inches minimum and 1.203 inches maximum

Polarization Method

jackscrew

Precious Material And Location

contact surfaces gold and contact surfaces silver

Precious Material And Weight

0.104 gold grains, troy and 0.104 silver grains, troy

Precious Material

gold and silver

Shell Material

aluminum alloy

Shell Surface Treatment

anodize

Shell Type

hood, top opening

Terminal Location

back single mating end single contact grouping

Terminal Type

solder well single mating end single contact grouping

Thread Class

2a and 2b

Thread Direction

right-hand

Thread Series Designator

unified national coarse (unc)

Threaded Device Type

coupling facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

C - Item contains combination of two or more precious metals (silver, gold, platinum).

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

56232

Lockheed Martin Corporation Div Rms - Mitchel Field

Non-manufacturers

95238

Winchester Interconnect Corporation Dba Winchester Interconnect Div Winchester Interconnect Rf Corporation

U.s./canadian manufacturers

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-00-847-3328?

   The FSCG of the NSN 5935-00-847-3328 is 5935

2. Does the NSN 5935-00-847-3328 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-00-847-3328 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-847-3328 contain precious materials?

   Item contains combination of two or more precious metals (silver, gold, platinum).

5. Does NSN 5935-00-847-3328 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-847-3328 was assigned to the Federal Catalog?

   It was assigned 66 years ago, on Fri, Jan 1, 1960