NSN 10292803

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

bracket carbon steel,cond crcq,spec astm a366; stud steel comp 1215,cond cf qq-s-637; finish zinc plated per finish 1.9.2.2 of mil-std-171; 0.110-0.130 in. width of bracket; 2 holes 0.240-0.260 in. dia; 1.120 in. wd of 2nd leg; includes ms35649-2384 and ms35333-76; nut height 0.625 in.; 2.190 in. high from end of leg to top of nut general characteristics item description.

NSN 6230-01-116-6845 Datasheet

(NSN) National Stock Number

6230-01-116-6845

(FSG) Federal Supply Group

62 - Lighting Fixtures and Lamps

(FSC) Federal Supply Classification

6230 - Electric Portable and Hand Lighting Equipment

(NIIN) National Item Identification Number

01-116-6845

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Sat, Aug 1, 1981

General Characteristics Item Description

bracket carbon steel,cond crcq,spec astm a366; stud steel comp 1215,cond cf qq-s-637; finish zinc plated per finish 1.9.2.2 of mil-std-171; 0.110-0.130 in. width of bracket; 2 holes 0.240-0.260 in. dia; 1.120 in. wd of 2nd leg; includes ms35649-2384 and ms35333-76; nut height 0.625 in.; 2.190 in. high from end of leg to top of nut

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1073172

Cross Reference

CAGE Codes

18876

Us Army Aviation and Missile Command

Government departments or units, including military organizations

55612

American Bristol Industries Inc.

U.s./canadian manufacturers

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 6230-01-116-6845?

   The FSCG of the NSN 6230-01-116-6845 is 6230

2. Does NSN 6230-01-116-6845 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 6230-01-116-6845 contain precious materials?

   Precious metal content is unknown

4. Does NSN 6230-01-116-6845 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 6230-01-116-6845 was assigned to the Federal Catalog?

   It was assigned 45 years ago, on Sat, Aug 1, 1981