NATO Stock Number
5905-01-267-3586
Sold in multiples of
1 EA
DEMIL
NO
Section Quantity
2
Body Style
Rectangular bushing mounted
Reliability Indicator
Not established
Shaft Diameter
Between 0.249 inches and 0.251 inches
Shaft Length
Between 1.188 inches and 1.252 inches
Mounting Bushing Length
Between 0.234 inches and 0.266 inches
Body Length
Between 1.031 inches and 1.093 inches
Body Width
Between 0.469 inches and 0.531 inches
Body Height
Between 0.469 inches and 0.531 inches
Undercut Diameter
Between 0.124 inches and 0.126 inches
Shaft Style
Round, stepped
Shaft Bearing Type
Bearing
Switch Type
Rotary
Switch Voltage Rating In Volts
28.0
Actuator Type
Single shaft
Effective Electrical Rotation In Deg Angular Rotation
Between 235.0 and 245.0
Maximum Starting Torque
3.50 inch-ounces
Maximum Running Torque
3.50 inch-ounces
Maximum Stop Torque
56.00 inch-ounces
Shaft End Play
0.020 inches
Switch Operating Position
Start of rotation
Switch Contact Arrangement
Single pole, single throw, normally open, both positions maintained
Fragility Factor
Moderately rugged
Undercut Length
Between 0.388 inches and 0.452 inches
Screw Thread Diameter
0.250 inches
Screw Thread Series Designator
Unef
Screw Thready Qty Per Inch (tpi)
32.0
Terminal Location
Lower adjacent side two rows
Mounting Method
Standard bushing
Features Provided
Humidity proof and switch
Cubic Measure
0.308 cubic inches
Electrical Resistance Per Section
10.0 percent, rated amperes c and better industrial clears
Electrical Resistance Per Section
2.5 percent, rated amperes c and better finish
Rotary Actuator Travel In Angular Deg
Between 290.0 and 300.0
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
120.0 all sections
Power Dissipation Rating Per Section In Watts
0.5 free air all sections
Resistance Tolerance Per Section In Percent
-5.0/+5.0 1st section
Resistance Tolerance Per Section In Percent
-5.0/+5.0 2nd section
Actuator Travel Control Feature
Clutch
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
70.0 all sections
Switch Current Type And Rating In Amps
0.125 dc
Standard Taper Curve Per Section
A all sections
Terminal Type And Quantity
8 tab, solder lug