NSN 113709

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

0.875 inches nominal center to center distance between mounting facilities parallel to width, 1.375 inches nominal distance from centerline to cable end, 0.875 inches nominal center to center distance between mounting facilities parallel to length, n1 connector end item identification, 1.560 inches nominal distance from centerline to connector end.

NSN 5935-01-222-2902 Datasheet

(NSN) National Stock Number

5935-01-222-2902

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-222-2902

Requires Demilitarization

Yes

(INC) Item Name Code

61026

Date

Tue, Dec 10, 1985

Schedule B Code

8538907080

End Item Identification

n1 connector

Center To Center Distance Between Mounting Facilities Parallel To Length

0.875 inches nominal

Center To Center Distance Between Mounting Facilities Parallel To Width

0.875 inches nominal

Distance From Centerline To Cable End

1.375 inches nominal

Distance From Centerline To Connector End

1.560 inches nominal

Flange Length

1.250 inches nominal

Material

steel corrosion resisting location not otherwise specified

Mounting Facility Type And Quantity

4 flange and 2 flange

Overall Height

1.810 inches nominal

Overall Width

1.250 inches nominal

Style Designator

angle shape w/flange

Unthreaded Mounting Hole Diameter

0.150 inches nominal and 0.221 inches nominal

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0061026

Cross Reference

CAGE Codes

08639

Engineered Wire and Cable Inc

U.s./canadian manufacturers

59501

Unison Industries Llc

U.s./canadian manufacturers

83311

Unison Industries, Llc Dba Unison Industries Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-222-2902?

   The FSCG of the NSN 5935-01-222-2902 is 5935

2. Does the NSN 5935-01-222-2902 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-222-2902 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 5935-01-222-2902 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5935-01-222-2902 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-222-2902 was assigned to the Federal Catalog?

   It was assigned 40 years ago, on Tue, Dec 10, 1985