NSN 1202P10

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

clutch actuator travel control feature, 85.0 single section ambient temp in deg celsius per section at full rated power, 150.0 single section ambient temp in deg celsius per section at zero percent rated power, 0.325 inches nominal body height, single shaft actuator type.

NSN 5905-00-262-5528 Datasheet

(NSN) National Stock Number

5905-00-262-5528

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5905 - Resistor

(NIIN) National Item Identification Number

00-262-5528

Requires Demilitarization

Yes

(INC) Item Name Code

37407

Date

Wed, Jul 4, 1973

Schedule B Code

8533400080

Actuator Travel Control Feature

clutch

Actuator Type

single shaft

Ambient Temp In Deg Celsius Per Section At Full Rated Power

85.0 single section

Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

150.0 single section

Body Height

0.325 inches nominal

Body Length

1.250 inches nominal

Body Width

0.195 inches nominal

Body Style

rectangular w/mounting holes/slots

Center To Center Distance Between Center Terminal And Outside Terminal

0.700 inches nominal

Center To Center Distance Between Terminals

0.900 inches nominal

Electrical Resistance Per Section

10.0 ohms single section

Function Characteristic Per Section

single section linear

Function Conformity Per Section

single section independent linearity

Function Conformity Tolerance Per Section

-1.00 to 1.00 single section

Lateral Distance Between Mounting Hole Centers

1.000 inches nominal

Maximum Running Torque

5.00 inch-ounces

Maximum Starting Torque

5.00 inch-ounces

Mounting Facility Quantity

2

Mounting Hole Diameter

0.093 inches nominal

Mounting Method

terminal and unthreaded hole(s)

Overall Height

0.825 inches nominal

Overall Length

1.320 inches nominal

Overall Width

0.195 inches nominal

Power Dissipation Rating Per Section In Watts

0.5 free air single section

Reliability Indicator

not established

Resistance Tolerance Per Section In Percent

-5.0 to 5.0 single section

Rotary Actuator Travel In Angular Deg

9000.0 nominal

Section Quantity

1

Shaft Diameter

0.125 inches nominal

Shaft Style

round, slotted

Shaft Length

0.070 inches nominal

Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

-10.0 to 10.0 single section

Terminal Location

lower adjacent side single row

Terminal Length

0.500 inches nominal

Terminal Type And Quantity

3 pin

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0037407

Cross Reference

CAGE Codes

18612

Vishay Intertechnology, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35140

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

062960

Schedule B & Trade

Schedule B

8533-40-0080

Description

variable resistors, including potentiometers, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77235

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5905-00-262-5528?

   The FSCG of the NSN 5905-00-262-5528 is 5905

2. Does the NSN 5905-00-262-5528 have a Schedule B code assigned?

   Yes, the Schedule B code is 8533400080

3. Does NSN 5905-00-262-5528 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5905-00-262-5528 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5905-00-262-5528 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5905-00-262-5528 was assigned to the Federal Catalog?

   It was assigned 53 years ago, on Wed, Jul 4, 1973