NSN 1226085

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

7.500 inches nominal center to center distance between mounting facilities parallel to length, rectangular shape body style, unable to decode contact material, unable to decode contact material document and classification, friction connector locking method.

NSN 5935-00-552-1304 Datasheet

(NSN) National Stock Number

5935-00-552-1304

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-552-1304

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Sun, Jan 1, 1961

Schedule B Code

8538907080

Body Style

rectangular shape

Center To Center Distance Between Mounting Facilities Parallel To Length

7.500 inches nominal

Connector Locking Method

friction

Contact Material Document And Classification

unable to decode

Contact Material

unable to decode

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Surface Treatment Document And Classification

unable to decode

Contact Surface Treatment

unable to decode

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.880 inches nominal

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Material Document And Classification

unable to decode

Insert Material

unable to decode

Mating End Quantity

1

Overall Height

1.120 inches nominal

Overall Length

8.250 inches nominal

Overall Width

1.380 inches nominal

Polarization Method

guide pin/socket

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.045 gold grains, troy

Terminal Location

unable to decode

Terminal Type

unable to decode

Unthreaded Mounting Hole Diameter

0.125 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

02660

Amphenol Corp Spectra-Strip/itd

U.s./canadian manufacturers

56232

Lockheed Martin Corporation Div Rms - Mitchel Field

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-00-552-1304?

   The FSCG of the NSN 5935-00-552-1304 is 5935

2. Does the NSN 5935-00-552-1304 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-00-552-1304 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-552-1304 contain precious materials?

   Item contains gold.

5. Does NSN 5935-00-552-1304 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-552-1304 was assigned to the Federal Catalog?

   It was assigned 65 years ago, on Sun, Jan 1, 1961