NSN 161EB3A

A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see valve (1), linear, directional control. It may be inline or cartridge (manifold) design. Excludes:valve (1), butterfly.

115.0 ac at sea level contact voltage rating in volts, 2.0 amperes resistive load ac at sea level contact load current rating, 28.0 dc at sea level contact voltage rating in volts, breaks before makes single section rear contact switching action, 1.0 amperes resistive load dc at sea level contact load current rating.

NSN 5930-00-173-1066 Datasheet

(NSN) National Stock Number

5930-00-173-1066

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-173-1066

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Fri, Dec 3, 1971

Schedule B Code

8536509020

Contact Load Current Rating

1.0 amperes resistive load dc at sea level

Contact Load Current Rating

2.0 amperes resistive load ac at sea level

Contact Switching Action

breaks before makes single section rear

Contact Voltage Rating In Volts

115.0 ac at sea level

Contact Voltage Rating In Volts

28.0 dc at sea level

Individual Section Quantity

1

Longest Horizontal Distance Between Mounting Centers

1.500 inches nominal single mounting facility

Mounting Facility Pattern

two position in-line single mounting facility

Mounting Method

bracket(s) and threaded hole(s) single mounting facility

Nominal Thread Size

0.164 inches single mounting facility

Operating Temp Range

-65.0 to 125.0 celsius

Overall Height

1.880 inches minimum and 2.770 inches maximum

Overall Length

2.375 inches nominal

Overall Width

1.880 inches minimum and 2.770 inches maximum

Pole Quantity

6 single section rear

Shaft Diameter

0.249 inches minimum and 0.251 inches maximum single actuator

Shaft Type

round single actuator

Shaft Length

0.938 inches nominal single actuator

Style Designator

tap, square frame

Switch Actuator Indexing Position Quantity

3 single actuator

Switch Actuator Positioning Increment

30.0 degrees single actuator

Switch Actuator Stop Device Type

adjustable stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

turret

Test Data Document

"81349-mil-s-3786 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2b single mounting facility

Thread Quantity Per Inch

32 single mounting facility

Thread Series Designator

unified national coarse (unc) single mounting facility

Throw Quantity

3 single section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

18876

Us Army Aviation and Missile Command

Government departments or units, including military organizations

28057

Shallco, Inc

U.s./canadian manufacturers

58880

Meggitt (new Hampshire), Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-173-1066?

   The FSCG of the NSN 5930-00-173-1066 is 5930

2. Does the NSN 5930-00-173-1066 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-00-173-1066 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-173-1066 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-173-1066 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-173-1066 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Fri, Dec 3, 1971