NSN 16SD1CE1

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

600.0 ac at sea level contact voltage rating in volts, 20.0 amperes resistive load ac at sea level contact load current rating, actuator knob features provided, dustproof hazardous locations/environmental protection, breaks before makes single section front contact switching action.

NSN 5930-00-636-0696 Datasheet

(NSN) National Stock Number

5930-00-636-0696

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-636-0696

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Tue, Jan 1, 1963

Schedule B Code

8536509025

Contact Load Current Rating

20.0 amperes resistive load ac at sea level

Contact Switching Action

breaks before makes single section front

Contact Voltage Rating In Volts

600.0 ac at sea level

Features Provided

actuator knob

Hazardous Locations/Environmental Protection

dustproof

Individual Section Quantity

1

Knob Manufacturer Code

71669

Knob Manufacturer Part Number

k-6046074

Pole Quantity

1 single section front

Shaft Length

1.375 inches nominal single actuator

Shaft Type

rectangular/square, threaded hole single actuator

Square Shaft Size

0.312 inches nominal single actuator

Switch Actuator Indexing Position Quantity

2 single actuator

Switch Actuator Positioning Increment

45.0 degrees single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab w/screw

Throw Quantity

1 single section front

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

03538

Lockheed Martin Corporation Div Rms

U.s./canadian manufacturers

30086

L3harris Maritime Power & Energy Solutions, Inc. Dba Spd Electrical Systems, Inc.

U.s./canadian manufacturers

71669

General Electric Co Switchgear and Control Division of Apparatus Group

U.s./canadian manufacturers

80064

Naval Ship Systems Command

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9025

Description

switches, rotary, rated at over 5 a, for a voltage not exceeding 1,000 volts

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-636-0696?

   The FSCG of the NSN 5930-00-636-0696 is 5930

2. Does the NSN 5930-00-636-0696 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509025

3. Does NSN 5930-00-636-0696 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-636-0696 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-636-0696 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-636-0696 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963