NSN 178064

A transformer consisting of one or more primary winding(s) and one or more secondary winding(s). It may be designed for direct connection to an alternating current source for purposes of changing the secondary volts and amperes or designed to eliminate metallic interconnection between circuits in an overall one to one voltage ratio, with or without additional output windings, or items designed to automatically maintain a constant output voltage within specified limits under varying input or load conditions. Also includes items having a provision for mechanically changing the turns ratio or inductive coupling in progressive increments by means of voltage taps, ratio adjuster, or devices oe similar design. For transformers having winding(s) common to both input and output circuits, see transformer (1), power, autotransformer. Excludes:transformer (1), pulse.

90.0 degrees nominal first leg angle, 0.194 inches nominal first leg hole diameter, 0.375 inches nominal first leg distance from edge to hole center along width, one hole first leg hole arrangement style, 0.500 inches nominal first leg end radius.

NSN 5340-00-121-3667 Datasheet

(NSN) National Stock Number

5340-00-121-3667

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-121-3667

Requires Demilitarization

Yes

(INC) Item Name Code

16900

Date

Tue, Jan 1, 1963

Schedule B Code

8302500000

First Leg Angle

90.0 degrees nominal

First Leg Distance From Edge To Hole Center Along Width

0.375 inches nominal

First Leg End Radius

0.500 inches nominal

First Leg Hole Arrangement Style

one hole

First Leg Hole Diameter

0.194 inches nominal

First Leg Distance From Edge To Hole Center Along Length

0.400 inches nominal

First Leg Style

end radius

First Leg Thickness

0.062 inches nominal

First Leg Width

0.750 inches nominal

First Leg Length

0.900 inches nominal

Material Document And Classification

mil-s-18728 mil spec single material response

Material

steel

Second Leg End Radius

0.500 inches nominal

Second Leg Hole Arrangement Style

one hole

Second Leg Hole Diameter

0.406 inches nominal

Second Leg Distance From Edge To Hole Center Along Length

0.400 inches nominal

Second Leg Distance From Edge To Hole Center Along Width

0.375 inches nominal

Second Leg Width

0.750 inches nominal

Second Leg Length

1.900 inches nominal

Second Leg Relationship To First Leg

not identical

Second Leg Style

end radius

Second Leg Thickness

0.062 inches nominal

Style Designator

angle

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

FPZ - San antonio air logistics center kelly afb, texas 78241-5000

Pseudo Item Name Code

0016900

Cross Reference

CAGE Codes

98897

Lockheed Martin Corp Dba Lockheed Martin Aerostructures Div Lockheed Martin Aeronautics Company

U.s./canadian manufacturers

Freight Information

Air Commodity

AZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

S - 60.0

National Motor Freight Class Rating

S - 60.0

Special Handling

Z - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

05390

Water Commodity

576 - Metal and metal products, nos, (less than 35 feet)

National Motor Freight Classification Item Number

013140

Schedule B & Trade

Schedule B

8302-50-0000

Description

hat-racks, hat pegs, brackets and similar fixtures, and parts thereof, of base metal

End Use

41050 - Cell phones and other household goods, n.e.c.

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69919

(NAICS) North American Industrial Classification System

337215

Questions & Answers

1. What is the FSCG of the NSN 5340-00-121-3667?

   The FSCG of the NSN 5340-00-121-3667 is 5340

2. Does the NSN 5340-00-121-3667 have a Schedule B code assigned?

   Yes, the Schedule B code is 8302500000

3. Does NSN 5340-00-121-3667 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-00-121-3667 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5340-00-121-3667 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-00-121-3667 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963