NSN 17D058

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

1520015992203 end item identification, latch assembly,over center part name assigned by controlling agency.

NSN 5340-01-655-3420 Datasheet

(NSN) National Stock Number

5340-01-655-3420

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-655-3420

Requires Demilitarization

Yes

(INC) Item Name Code

23202

Date

Wed, May 25, 2016

Schedule B Code

8301600000

End Item Identification

1520015992203

Part Name Assigned By Controlling Agency

latch assembly,over center

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0023202

Cross Reference

CAGE Codes

05259

Container Research Corp Dba Container Research Corp Div Containr Research Corporation

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

576 - Metal and metal products, nos, (less than 35 feet)

National Motor Freight Classification Item Number

095190

Schedule B & Trade

Schedule B

8301-60-0000

Description

parts of locks, base metal

End Use

12300 - Finished metal shapes

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69911

(NAICS) North American Industrial Classification System

332510

Questions & Answers

1. What is the FSCG of the NSN 5340-01-655-3420?

   The FSCG of the NSN 5340-01-655-3420 is 5340

2. Does the NSN 5340-01-655-3420 have a Schedule B code assigned?

   Yes, the Schedule B code is 8301600000

3. Does NSN 5340-01-655-3420 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-01-655-3420 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5340-01-655-3420 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-01-655-3420 was assigned to the Federal Catalog?

   It was assigned 10 years ago, on Wed, May 25, 2016