NSN 1820541

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

22.0 single mating end first contact grouping contact maximum current rating in amps, 7.5 single mating end second contact grouping contact maximum current rating in amps, nonremovable single mating end single contact grouping contact removability, bayonet latch connector locking method, 1 single mating end first contact grouping included contact quantity.

NSN 5935-00-537-0149 Datasheet

(NSN) National Stock Number

5935-00-537-0149

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-537-0149

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Sun, Jan 1, 1961

Schedule B Code

8536695050

Connector Locking Method

bayonet latch

Contact Removability

nonremovable single mating end single contact grouping

Contact Maximum Current Rating In Amps

22.0 single mating end first contact grouping

Contact Maximum Current Rating In Amps

7.5 single mating end second contact grouping

Included Contact Quantity

1 single mating end first contact grouping

Included Contact Quantity

22 single mating end second contact grouping

Included Contact Type

round socket single mating end single contact grouping

Insert Material

rubber single mating end

Mating End Quantity

1

Nominal Thread Size

1.000 inches

Overall Diameter

1.260 inches nominal

Overall Length

1.440 inches nominal

Shell Material Document And Classification

qq-a-200/3,alloy 2024 fed spec single material response

Shell Surface Treatment Document And Classification

qq-p-416,ty 2,cl 3 fed spec single treatment response

Shell Material

aluminum alloy

Shell Surface Treatment

cadmium

Shell Type

solid

Terminal Location

back single mating end all contact groupings

Terminal Type

solder well single mating end all contact groupings

Thread Direction

right-hand

Thread Series Designator

unef

Threaded Device Type

coupling facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

18544

Tellurometer-Usa Div of Plessey Inc

U.s./canadian manufacturers

71468

Itt Cannon Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-00-537-0149?

   The FSCG of the NSN 5935-00-537-0149 is 5935

2. Does the NSN 5935-00-537-0149 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-00-537-0149 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-537-0149 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-00-537-0149 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-537-0149 was assigned to the Federal Catalog?

   It was assigned 65 years ago, on Sun, Jan 1, 1961