NSN 1889691

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

an/apn-59e end item identification, aluminum qq-a-250/8,5052-h34,.036 thk; 1.88 in. lg,1.00 in. w,.84 in. h; finish: all over-chemical film mil-c-5541,class 1a,paint system gray m695476-436,weld mil-std-454,requirement 13,rod qq-r-566 class 4043,.09 in. h characters per ms33558 using ink epoxy black mil-1-43553 fed-std-595 number 17038,piecemarking stencil or silk screen 03956-1889691 general characteristics item description.

NSN 5935-01-060-9381 Datasheet

(NSN) National Stock Number

5935-01-060-9381

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-060-9381

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Wed, Jun 7, 1978

End Item Identification

an/apn-59e

General Characteristics Item Description

aluminum qq-a-250/8,5052-h34,.036 thk; 1.88 in. lg,1.00 in. w,.84 in. h; finish: all over-chemical film mil-c-5541,class 1a,paint system gray m695476-436,weld mil-std-454,requirement 13,rod qq-r-566 class 4043,.09 in. h characters per ms33558 using ink epoxy black mil-1-43553 fed-std-595 number 17038,piecemarking stencil or silk screen 03956-1889691

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1069539

Cross Reference

CAGE Codes

03956

Northrop Grumman Systems Corporation

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Rail Variation

1

Special Handling

Z - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 5935-01-060-9381?

   The FSCG of the NSN 5935-01-060-9381 is 5935

2. Does NSN 5935-01-060-9381 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5935-01-060-9381 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5935-01-060-9381 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5935-01-060-9381 was assigned to the Federal Catalog?

   It was assigned 48 years ago, on Wed, Jun 7, 1978