NSN 191738

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

metal thickness 0.010 in.,1.710 o/a lg,prebent,o/a height 0.080 in.,0.055 width special features.

NSN 5360-00-894-6712 Datasheet

(NSN) National Stock Number

5360-00-894-6712

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5360 - Coil, Flat, Leaf and Wire Springs

(NIIN) National Item Identification Number

00-894-6712

Requires Demilitarization

Yes

(INC) Item Name Code

61782

Date

Mon, Jan 1, 1962

Special Features

metal thickness 0.010 in.,1.710 o/a lg,prebent,o/a height 0.080 in.,0.055 width

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0061782

Cross Reference

CAGE Codes

31361

Woodward, Inc.

U.s./canadian manufacturers

66503

Woodward, Inc. Div Fuel Systems and Controls

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

87470

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

178020

Questions & Answers

1. What is the FSCG of the NSN 5360-00-894-6712?

   The FSCG of the NSN 5360-00-894-6712 is 5360

2. Does NSN 5360-00-894-6712 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5360-00-894-6712 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5360-00-894-6712 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 5360-00-894-6712 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962