1. Home /
  2. FSC NSN Catalog /
  3. Electrical Connectors /
  4. 19228

NSN 19228

Electrical Plug Connector

internally threaded coupling nut connector locking method, compression nut connector cable strain relief method, 0.710 inches minimum and 0.795 inches maximum cable entrance diameter, straight shape, internal coupling body style, qq-c-530,cond a,cond ht fed spec single material response single mating end single contact grouping contact material document and classification.

NSN 5935-00-421-4755 Datasheet

(NSN) National Stock Number
5935-00-421-4755
(FSC) Federal Supply Classification
5935 - Electrical Connectors
(NIIN) National Item Identification Number
00-421-4755
Requires Demilitarization
Yes
(INC) Item Name Code
01938
Date
Wed, Dec 9, 1970
Schedule B Code
8536695050
Body Style
straight shape, internal coupling
Cable Entrance Diameter
0.710 inches minimum and 0.795 inches maximum
Connector Cable Strain Relief Method
compression nut
Connector Locking Method
internally threaded coupling nut
Contact Material Document And Classification
qq-c-530,cond a,cond ht fed spec single material response single mating end single contact grouping
Contact Material
copper alloy single mating end single contact grouping
Contact Position Arrangement Style
lt single mating end
Contact Removability
removable single mating end single contact grouping
Contact Maximum Ac Voltage Rating In Volts
5000.0 single mating end single contact grouping
Contact Surface Treatment Document And Classification
qq-s-365,ty 2 fed spec single treatment response single mating end single contact grouping
Contact Surface Treatment
silver single mating end single contact grouping
Environmental Protection
corrosion resistant and cold resistant and heat resistant and humidity resistant and shock resistant and thermal shock resistant and vibration resistant
Included Contact Quantity
1 single mating end single contact grouping
Included Contact Type
coaxial pin single mating end single contact grouping
Insert Material
plastic polytetrafluoroethylene single mating end
Mating End Quantity
1
Nominal Thread Size
1.250 inches
Overall Diameter
1.625 inches nominal
Overall Length
2.984 inches nominal
Precious Material And Location
contact and shell surfaces silver and shell surface rhodium
Precious Material And Weight
0.105 silver grains, troy and 0.100 rhodium grains, troy
Precious Material
silver and rhodium
Radio Frequency Type Contact Characteristic Impedance In Ohms
50.0 single mating end single contact grouping
Shell Material Document And Classification
qq-a-325 fed spec single material response
Shell Material
aluminum alloy
Shell Surface Treatment Document And Classification
qq-s-365 fed spec 1st treatment response
Shell Surface Treatment
silver and rhodium
Shell Type
solid
Terminal Location
back single mating end single contact grouping
Terminal Type
crimp single mating end single contact grouping
Thread Class
2b
Thread Direction
right-hand
Thread Quantity Per Inch
18
Thread Series Designator
unef
Threaded Device Type
coupling facility

Identification

Demilitarization Code
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Precious Metals Indicator
C - Item contains combination of two or more precious metals (silver, gold, platinum).
Hazardous Metals Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Pseudo Item Name Code
0001938

Cross Reference

CAGE Codes

17549
Itt Cannon
U.s./canadian manufacturers
71468
Itt Cannon Llc
U.s./canadian manufacturers
00795
Delta Electronics Manufacturing Corp Div Delta Electronics Mfg. Corp.
U.s./canadian manufacturers
00752
L3harris Technologies, Inc. Dba Harris Corp Div Antenna Products
U.s./canadian manufacturers

Freight Information

Air Commodity
HZ -
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
National Motor Freight Class Rating
W - Rating variable
Special Handling
9 - Other or no special handling required (sh)
Type of Cargo
Z - No special type of cargo code applicable
Uniform Freight Classification Item Number
34570
Water Commodity
658 - Electrical appliances, small
National Motor Freight Classification Item Number
061680

Schedule B & Trade

Schedule B
8536-69-5050
Description
electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi
End Use
20005 - Electric apparatus
Unit of Quantity
NO
USDA
Yes
(SITC) Standard International Trade Classification
77258
(NAICS) North American Industrial Classification System
335931

Questions & Answers

  1. What is the FSCG of the NSN 5935-00-421-4755?

    The FSCG of the NSN 5935-00-421-4755 is 5935

  2. Does the NSN 5935-00-421-4755 have a Schedule B code assigned?

    Yes, the Schedule B code is 8536695050

  3. Does NSN 5935-00-421-4755 require demilitarization?

    Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

  4. Does NSN 5935-00-421-4755 contain precious materials?

    Item contains combination of two or more precious metals (silver, gold, platinum).

  5. Does NSN 5935-00-421-4755 contain hazardous materials?

    Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

  6. When the NSN 5935-00-421-4755 was assigned to the Federal Catalog?

    It was assigned 55 years ago, on Wed, Dec 9, 1970

Globe Transparent
Get in Touch
Looking for technical parts, product details, or custom project planning? Our team has you covered with end-to-end support every step of the way.
Contact Us

Pricing & Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.