NATO Stock Number
5990-00-341-3194
Sold in multiples of
1 EA
DEMIL
DEMIL/MLI
Body Material
Steel, corrosion resisting
Body Style
Standard round b
Shoulder Diameter
1.0000 inches
Pilot Diameter
0.6250 inches
Overall Length
2.3560 inches
Flange Diameter
1.0620 inches
Flange Thickness
0.0930 inches
Undercut Width
0.0620 inches
Shaft Diameter
0.1872 inches single shaft
Shaft Length
0.5620 inches single shaft
Maximum Tempurature Rise
10.0 degrees celsius
Securing Hole Quantity
4
Stator Input Voltage Rating In Volts
11.8
Stator Input Current Rating
86.0 milliamperes
Stator Input Electrical Power Rating
150.0 watts
Frequency In Hertz
Between 396.0 and 404.0
Zso Impedance Magnitude In Ohms
Between 118.00 and 150.00
Zso Impedance Angle In Deg
Between 78.00 and 84.00
Zrs Impedance Magnitude In Ohms
Between 130.00 and 170.00
Zrs Impedance Angle In Deg
Between 23.00 and 35.00
Phase Shift Angle In Deg
Between 3.000 input to output and 6.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt
15.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt
18.00
Electrical Error Angular Range In Minutes
-7.0/+7.0
Spline Tooth Quantity
21 single shaft
Actuator Friction Torque At Plus 25 Deg Celsius
0.07 inch-ounces
Pilot Length
0.0620 inches
Shoulder Length
0.0620 inches
Mounting Surface To Terminal End Distance
1.7320 inches
Spline Tooth Diametral Pitch
120 single shaft
Shaft Thread Series Designator
Unf single shaft
Shaft Thread Direction
Right-hand single shaft
Shaft Thread Class
2a
Mounting Facility Screw Thread Series Designator
Unc
Terminal Location
Rear
Shaft Thread Length
0.1970 inches single shaft
Shaft Type
Spline w/threads single shaft
Mounting Facility Screw Thread Diameter
0.112 inches
Shaft Thread Size
0.190 inches single shaft
Test Data Document
81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity
5 screw
