NSN 20H

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

forged shank construction method and location, swinging fluke design, fabricated flukes construction method and location, not included balancing band, fabricated stock construction method and location.

NSN 2040-00-272-2402 Datasheet

(NSN) National Stock Number

2040-00-272-2402

(FSG) Federal Supply Group

20 - Ship and Marine Equipment

(FSC) Federal Supply Classification

2040 - Marine Hardware and Hull Items

(NIIN) National Item Identification Number

00-272-2402

Requires Demilitarization

Yes

(INC) Item Name Code

04944

Date

Tue, Jan 1, 1963

Schedule B Code

7316000000

Balancing Band

not included

Construction Method And Location

fabricated stock

Construction Method And Location

forged shank

Construction Method And Location

fabricated flukes

Fluke Design

swinging

Fluke Hole

not included

Fluke Length From Stock Centerline To Tip

19.062 inches nominal

Material

steel

Shackle

not included

Shank Length From Stock Centerline To Shackle Pin Hole Centerline

30.688 inches nominal

Stock Design

fixed

Stock Overall Length

26.812 inches nominal

Surface Treatment

zinc

Weight

18.000 pounds nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

N32 -

Pseudo Item Name Code

0004944

Cross Reference

CAGE Codes

80811

Danforths Anchors

U.s./canadian manufacturers

0W1Z2

Thomas and Betts Corp Electrical Div

U.s./canadian manufacturers

1Q7J4

Edgewave, Inc

Non-manufacturers

51589

St-Semicon Inc

U.s./canadian manufacturers

56501

Abb Installation Products Inc

U.s./canadian manufacturers

66295

Wittek Companies Intl Inc

U.s./canadian manufacturers

76732

Nupla Corporation

U.s./canadian manufacturers

81300

Parker-Hannifin Corporation Dba Industrial Hose Product Division Div Hose Products Division

U.s./canadian manufacturers

82110

Gudebrod, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

R - 65.0

National Motor Freight Class Rating

R - 65.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

06250

Water Commodity

576 - Metal and metal products, nos, (less than 35 feet)

National Motor Freight Classification Item Number

104040

Schedule B & Trade

Schedule B

7316-00-0000

Description

anchors, grapnels and parts thereof, of iron or steel

End Use

22220 - Marine engines, parts

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

69961

(NAICS) North American Industrial Classification System

332999

Questions & Answers

1. What is the FSCG of the NSN 2040-00-272-2402?

   The FSCG of the NSN 2040-00-272-2402 is 2040

2. Does the NSN 2040-00-272-2402 have a Schedule B code assigned?

   Yes, the Schedule B code is 7316000000

3. Does NSN 2040-00-272-2402 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 2040-00-272-2402 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 2040-00-272-2402 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 2040-00-272-2402 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963