NSN 2159153-2

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

unable to decode contact position arrangement style, unable to decode contact maximum ac voltage rating in volts, unable to decode contact removability, unable to decode contact material, straight shape body style.

NSN 5935-00-237-4878 Datasheet

(NSN) National Stock Number

5935-00-237-4878

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-237-4878

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Fri, Nov 6, 1970

Schedule B Code

8538907080

Body Style

straight shape

Contact Material

unable to decode

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Maximum Ac Voltage Rating In Volts

unable to decode

Contact Maximum Current Rating In Amps

unable to decode

Contact Surface Treatment

Distance Between Mounting Facility Centers

1.312 inches nominal

Environmental Protection

heat resistant and cold resistant

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Material Document And Classification

unable to decode

Insert Material

unable to decode

Mating End Quantity

1

Overall Height

0.678 inches nominal

Overall Length

1.556 inches maximum

Overall Width

0.509 inches maximum

Polarization Method

fixed contact to contact

Precious Material And Location

contact surfaces gold and contact surfaces silver

Precious Material

gold and silver

Precious Material And Weight

0.015 gold grains, troy and 0.015 silver grains, troy

Shell Surface Treatment Document And Classification

qq-p-416,ty 2,cl 3 fed spec single treatment response

Shell Material

steel

Shell Surface Treatment

cadmium

Shell Type

solid

Terminal Location

unable to decode

Terminal Type

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

71468

Itt Cannon Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-00-237-4878?

   The FSCG of the NSN 5935-00-237-4878 is 5935

2. Does the NSN 5935-00-237-4878 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-00-237-4878 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-237-4878 contain precious materials?

   Item contains gold.

5. Does NSN 5935-00-237-4878 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-237-4878 was assigned to the Federal Catalog?

   It was assigned 55 years ago, on Fri, Nov 6, 1970