NATO Stock Number
5930-00-034-0949
Sold in multiples of
1 EA
DEMIL
NO
Thread Class
2a single mounting facility
Thread Length
0.360 inches single mounting facility and 0.400 inches single mounting facility
Overall Length
Between 2.398 inches and 2.438 inches
First Flat Length
0.290 inches single actuator and 0.330 inches single actuator
Flat Height
0.213 inches single actuator and 0.223 inches single actuator
Shaft Diameter
0.248 inches single actuator and 0.250 inches single actuator
Shaft Length
0.730 inches single actuator and 0.770 inches single actuator
Overall Diameter
Between 1.248 inches and 1.250 inches
Nonturn Device Radius
0.510 inches at 3: 00 o'clock and 0.550 inches at 3: 00 o'clock
Individual Section Quantity
3
Nonturn Device Type
Tab at 3: 00 o'clock
Operating Tempurature Range
-25.0 to 85.0 degrees celsius
Switch Contact Basic Design
Nonpile-up symmetrical
Pole Quantity
1 1st section rear
Pole Quantity
1 2nd section rear
Pole Quantity
2 3rd section rear
Throw Quantity
10 1st section rear
Throw Quantity
10 2nd section rear
Throw Quantity
4 3rd section rear
Mounting Method
Threaded bushing single mounting facility
Thread Size
0.375 inches single mounting facility
Contact Voltage Rating In Volts
110.0 ac at sea level
Contact Voltage Rating In Volts
28.0 dc at sea level
Shaft Flat/slot Angular Location
225.0 degrees from nonturn device single actuator
Switch Actuator Indexing Position Quantity
10 single actuator
Shaft Type
Round, flatted single actuator
Terminal Type
Tab, solder lug
Contact Switching Action
Breaks before makes each section rear
Switch Actuator Positioning Increment
30.0 degrees single actuator
Switch Actuator Stop Device Type
Fixed stop single actuator
Contact Load Current Rating
2.0 amperes resistive load dc at sea level
Contact Load Current Rating
1.0 amperes resistive load ac at sea level
Style Designator
Circular wafer, bushing mount
Test Data Document
80063-smc423132 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Thread Series Designator
Unef single mounting facility
