NSN 223-596-9304

A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.

unable to decode contact position arrangement style, unable to decode contact material, externally threaded shell connector locking method, straight shape, external coupling body style, 0.718 inches nominal center to center distance between mounting facilities parallel to height.

NSN 5935-01-024-4881 Datasheet

(NSN) National Stock Number

5935-01-024-4881

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-024-4881

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Mon, Jul 12, 1976

Schedule B Code

8538907080

Body Style

straight shape, external coupling

Center To Center Distance Between Mounting Facilities Parallel To Height

0.718 inches nominal

Connector Locking Method

externally threaded shell

Contact Material

unable to decode

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Maximum Ac Voltage Rating In Volts

unable to decode

Contact Maximum Current Rating In Amps

unable to decode

Contact Maximum Dc Voltage Rating In Volts

unable to decode

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.718 inches nominal

Environmental Protection

moisture proof and salt water resistant and vibration proof

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Material

unable to decode

Insert Position In Deg

0.0

Mating End Quantity

1

Nominal Thread Size

0.625 inches

Overall Height

1.032 inches maximum

Overall Length

0.715 inches nominal

Overall Width

1.032 inches maximum

Polarization Method

keyway or multiple keyway

Shell Material

steel

Shell Surface Treatment

nickel

Shell Type

solid

Terminal Location

unable to decode

Terminal Type

unable to decode

Thread Class

2a

Thread Direction

right-hand

Thread Quantity Per Inch

24

Thread Series Designator

unef

Threaded Device Type

coupling facility

Unthreaded Mounting Hole Diameter

0.120 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

59364

Honeywell International Inc. Dba Honeywell International Div Aerospace - Tempe (west Warner Road)

U.s./canadian manufacturers

99193

Honeywell International Inc. Dba Honeywell International Div Aerospace - Phoenix

U.s./canadian manufacturers

71468

Itt Cannon Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-024-4881?

   The FSCG of the NSN 5935-01-024-4881 is 5935

2. Does the NSN 5935-01-024-4881 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-024-4881 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-024-4881 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-01-024-4881 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-024-4881 was assigned to the Federal Catalog?

   It was assigned 50 years ago, on Mon, Jul 12, 1976