NSN 2264872

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

discrimination at specified frequencies per function in decibels, metal body material, 2.750 inches nominal body height, 1.810 inches maximum body width, 1.940 inches maximum body length.

NSN 5915-00-809-3795 Datasheet

(NSN) National Stock Number

5915-00-809-3795

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5915 - Filters and Networks

(NIIN) National Item Identification Number

00-809-3795

Requires Demilitarization

Yes

(INC) Item Name Code

13911

Date

Mon, Jan 1, 1962

Schedule B Code

8527995030

Body Height

2.750 inches nominal

Body Length

1.940 inches maximum

Body Material

metal

Body Width

1.810 inches maximum

Discrimination At Specified Frequencies Per Function In Decibels

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.245 inches minimum and 1.255 inches maximum

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

1.370 inches minimum and 1.380 inches maximum

Frequency Band Width Per Function

50.00 hertz blank and 200.00 hertz blank

Functional Terminal Type And Quantity

unable to decode

Inclosure Type

hermetically sealed

Input Impedance Per Function W/Load

800.0 ohms blank

Insertion Loss At Reference Frequency Per Function In Decibels

10.0 blank

Maximum Dielectric Withstanding Ac Rms Voltage

1.5 kilovolts at sea level

Mounting Facility Screw Thread Series Designator

unified national coarse (unc)

Mounting Facility Type And Quantity

4 threaded stud(s)

Nominal Thread Size

0.138 inches

Operating Temp Range

-26.0 to 105.0 celsius

Output Impedance Per Function W/Source Across Input

1.35 kilohms blank

Overall Height

3.590 inches nominal

Principal Circuitry Type Per Function

inductance-capacitance-resistance blank

Reference Frequency Per Function

125.0 hertz blank

Specified Frequencies Of Discrimination Per Function

50.00 hertz blank and 200.00 hertz blank and 325.00 hertz blank and 450.00 hertz blank

Style Designator

rectangular terminal/terminals on opposite surfaces

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0013911

Cross Reference

CAGE Codes

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

36090

Lockheed Martin Librascope Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

21275

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

069100

Schedule B & Trade

Schedule B

8527-99-5030

Description

reception apparatus, nesoi

End Use

41210 - Stereo equipment, etc.

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76289

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5915-00-809-3795?

   The FSCG of the NSN 5915-00-809-3795 is 5915

2. Does the NSN 5915-00-809-3795 have a Schedule B code assigned?

   Yes, the Schedule B code is 8527995030

3. Does NSN 5915-00-809-3795 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5915-00-809-3795 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5915-00-809-3795 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5915-00-809-3795 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962