NSN 232-20441-2

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

837.50 megahertz blank and 962.50 megahertz blank frequency band width per function, encased inclosure type, discrimination at specified frequencies per function in decibels, unable to decode functional terminal type and quantity, 1.130 inches nominal body outside diameter.

NSN 5915-01-178-4277 Datasheet

(NSN) National Stock Number

5915-01-178-4277

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5915 - Filters and Networks

(NIIN) National Item Identification Number

01-178-4277

Requires Demilitarization

Yes

(INC) Item Name Code

00209

Date

Sat, May 5, 1984

Schedule B Code

8527995030

Body Outside Diameter

1.130 inches nominal

Discrimination At Specified Frequencies Per Function In Decibels

Frequency Band Width Per Function

837.50 megahertz blank and 962.50 megahertz blank

Functional Terminal Type And Quantity

unable to decode

Inclosure Type

encased

Input Terminal Identification

sma-receptacle

Input Terminal Manufacturer Code

21377

Insertion Loss At Reference Frequency Per Function In Decibels

1.0 blank

Load Impedance Per Function

50.0 ohms blank

Mounting Facility Type And Quantity

2 terminal

Operating Temp Range

-55.0 to 125.0 celsius

Output Terminal Identification

sma-receptacle

Output Terminal Manufacturer Code

21377

Overall Length

8.750 inches nominal

Reference Frequency Per Function

900.0 megahertz blank

Source Impedance Rating Per Function

50.0 ohms blank

Specified Frequencies Of Discrimination Per Function

525.00 megahertz blank and 837.50 megahertz blank and 962.50 megahertz blank and 1.275 gigahertz blank

Style Designator

round terminal/terminals on opposite surfaces

Vibration Resistance Range In Hertz

+0.02 to 2000.00

Voltage Standing Wave Ratio Frequency Limits Per Function

837.5 megahertz blank and 962.5 megahertz blank

Voltage Standing Wave Ratio Per Function

1.5 blank

Identification

Demilitarization Code

D - Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000209

Cross Reference

CAGE Codes

81205

The Boeing Company Div Defense

U.s./canadian manufacturers

23042

Trilithic, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

58500

Water Commodity

593 - Motors and parts, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

061990

Schedule B & Trade

Schedule B

8527-99-5030

Description

reception apparatus, nesoi

End Use

41210 - Stereo equipment, etc.

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76289

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5915-01-178-4277?

   The FSCG of the NSN 5915-01-178-4277 is 5915

2. Does the NSN 5915-01-178-4277 have a Schedule B code assigned?

   Yes, the Schedule B code is 8527995030

3. Does NSN 5915-01-178-4277 require demilitarization?

   Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

4. Does NSN 5915-01-178-4277 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5915-01-178-4277 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5915-01-178-4277 was assigned to the Federal Catalog?

   It was assigned 42 years ago, on Sat, May 5, 1984