NATO Stock Number
5905-00-931-5896
Sold in multiples of
1 EA
DEMIL
NO
Section Quantity
1
Body Style
Rectangular w/mounting holes/slots
Reliability Indicator
Not established
Mounting Hole Diameter
Between 0.088 inches and 0.098 inches
Shaft Diameter
Between 0.100 inches and 0.140 inches
Shaft Length
Between 0.036 inches and 0.077 inches
Body Length
Between 1.218 inches and 1.282 inches
Body Width
Between 0.235 inches and 0.300 inches
Body Height
0.312 inches
Shaft Style
Round, slotted
Actuator Type
Single shaft
Effective Electrical Rotation In Deg Angular Rotation
Between 6120.0 and 9720.0
Lateral Distance Between Mounting Hole Centers
1.000 inches
Mounting Facility Quantity
2
Terminal Location
Lower adjacent side single row
Mounting Method
Unthreaded hole
Electrical Resistance Per Section
100.0 kilohms single section
Rotary Actuator Travel In Angular Deg
Between 6120.0 and 9720.0
Resistance Tempurature Characteristic Range Per Section In Percent
+0.0/+8.0 -55 degrees celsius single section and +0.0/+4.0 -25 degrees celsius single section and -3.0/+3.0 85 degrees celsius single section and -6.5/+6.5 125 degrees celsius single section
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
125.0 single section
Power Dissipation Rating Per Section In Watts
0.25 free air single section
Resistance Tolerance Per Section In Percent
-10.0/+10.0 single section
Actuator Travel Control Feature
Clutch
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
70.0 single section
Standard Taper Curve Per Section
A single section
Test Data Document
81349-mil-r-22097 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity
3 tab, solder lug
Specification Data
81349-mil-r-22097/1 government specification