NSN 2388232-591

A switch which is externally actuated by a thumbwheel and/or pushbutton. A legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. Electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. May have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing.

cable clamp connector cable strain relief method, 0.922 inches minimum and 1.250 inches maximum cable entrance diameter, straight shape, internal coupling w/strain relief body style, 3.639 inches minimum and 3.649 inches maximum body length, internally threaded coupling ring connector locking method.

NSN 5935-00-957-0803 Datasheet

(NSN) National Stock Number

5935-00-957-0803

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-957-0803

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Fri, Jan 1, 1960

Schedule B Code

8536695050

Body Length

3.639 inches minimum and 3.649 inches maximum

Body Style

straight shape, internal coupling w/strain relief

Cable Entrance Diameter

0.922 inches minimum and 1.250 inches maximum

Connector Cable Strain Relief Method

cable clamp

Connector Locking Method

internally threaded coupling ring

Contact Material

copper alloy single mating end single contact grouping

Contact Removability

removable single mating end single contact grouping

Contact Maximum Ac Voltage Rating In Volts

900.0 single mating end single contact grouping

Contact Maximum Current Rating In Amps

135.0 single mating end single contact grouping

Contact Maximum Dc Voltage Rating In Volts

1250.0 single mating end single contact grouping

Contact Position Arrangement Style

32-17 single mating end

Contact Surface Treatment Document And Classification

mil-g-45204,ty 2,grade 0,class 1 mil spec 1st treatment response and qq-n-290,class 2 fed spec 2nd treatment response single mating end single contact grouping

Contact Surface Treatment

gold and nickel single mating end single contact grouping

Environmental Protection

moisture proof and salt water resistant and vibration proof and shock resistant and cold resistant and heat resistant and explosion proof

Included Contact Quantity

4 single mating end single contact grouping

Included Contact Type

round socket single mating end single contact grouping

Insert Material

rubber single mating end

Insert Position In Deg

0.0

Mating End Quantity

1

Nominal Thread Size

2.000 inches

Overall Diameter

2.219 inches nominal

Polarization Method

keyway or multiple keyway

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.020 gold grains, troy

Shell Material

aluminum alloy

Shell Surface Treatment

anodize

Shell Type

solid

Terminal Location

back single mating end single contact grouping

Terminal Type

crimp single mating end single contact grouping

Thread Class

2b

Thread Direction

right-hand

Thread Quantity Per Inch

18

Thread Series Designator

uns

Threaded Device Type

coupling facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

77820

Amphenol Corp Div Amphenol Aerospace Operations

U.s./canadian manufacturers

18876

Us Army Aviation and Missile Command

Government departments or units, including military organizations

56232

Lockheed Martin Corporation Div Rms - Mitchel Field

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-00-957-0803?

   The FSCG of the NSN 5935-00-957-0803 is 5935

2. Does the NSN 5935-00-957-0803 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-00-957-0803 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-957-0803 contain precious materials?

   Item contains gold.

5. Does NSN 5935-00-957-0803 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-957-0803 was assigned to the Federal Catalog?

   It was assigned 66 years ago, on Fri, Jan 1, 1960