NSN 240243

2.503 inches nominal center section height, 0.297 inches minimum and 0.328 inches maximum first leg corner radius, 90.0 degrees nominal first leg angle, 0.087 inches minimum and 0.099 inches maximum center section thickness, 0.297 inches minimum and 0.328 inches maximum first leg distance from edge to hole center along width.

NSN 5340-00-031-6462 Datasheet

(NSN) National Stock Number

5340-00-031-6462

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-031-6462

Requires Demilitarization

Yes

(INC) Item Name Code

20354

Date

Tue, Jan 1, 1963

Center Section Height

2.503 inches nominal

Center Section Thickness

0.087 inches minimum and 0.099 inches maximum

First Leg Angle

90.0 degrees nominal

First Leg Corner Radius

0.297 inches minimum and 0.328 inches maximum

First Leg Distance From Edge To Hole Center Along Width

0.297 inches minimum and 0.328 inches maximum

First Leg Hole Arrangement Style

two holes

First Leg Hole Diameter

0.339 inches minimum and 0.349 inches maximum

First Leg Distance Between Hole Centers Along Width

3.003 inches nominal

First Leg Distance From Edge To Hole Center Along Length

0.297 inches minimum and 0.328 inches maximum

First Leg Thickness

0.087 inches minimum and 0.099 inches maximum

First Leg Width

3.627 inches nominal

First Leg Length

0.855 inches nominal

Material Document And Classification

sae4130 assn std 1st material response or asae8630 assn std 2nd material response

Material

steel comp 4130 or steel comp 8630

Mounting Hole Type

plain

Second Leg Angle

90.0 degrees nominal

Second Leg End Radius

0.406 inches minimum and 0.469 inches maximum

Second Leg Hole Arrangement Style

one hole

Second Leg Hole Diameter

0.448 inches minimum and 0.458 inches maximum

Second Leg Length

1.131 inches nominal

Second Leg Distance From Edge To Hole Center Along Length

0.406 inches minimum and 0.469 inches maximum

Second Leg Distance From Edge To Hole Center Along Width

0.640 inches minimum and 0.660 inches maximum

Second Leg Thickness

0.087 inches minimum and 0.099 inches maximum

Second Leg Relationship To First Leg

not identical

Second Leg Style

end radius and tapered

Special Features

hardness rockwell c32 to c38

Style Designator

double angle

Surface Treatment Document And Classification

ams 2400 assn std single treatment response

Surface Treatment

cadmium

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9I - Defense industrial supply center philadelphia, pennsylvania 19111

Pseudo Item Name Code

0020354

Cross Reference

CAGE Codes

77445

Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney

Non-manufacturers

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 5340-00-031-6462?

   The FSCG of the NSN 5340-00-031-6462 is 5340

2. Does NSN 5340-00-031-6462 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-00-031-6462 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5340-00-031-6462 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-00-031-6462 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963