NSN 249094

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

ap65mhg end item identification, 54308 end item source, outrigger cyl seals usage design, truck,maintenance end item name.

NSN 5330-01-342-5843 Datasheet

(NSN) National Stock Number

5330-01-342-5843

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5330 - Packing and Gasket Materials

(NIIN) National Item Identification Number

01-342-5843

Requires Demilitarization

Yes

(INC) Item Name Code

34944

Date

Fri, Jul 26, 1991

Schedule B Code

8484200000

End Item Identification

ap65mhg

End Item Name

truck,maintenance

End Item Source

54308

Usage Design

outrigger cyl seals

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0034944

Cross Reference

CAGE Codes

02GJ5

Lockheed Martin Corp

U.s./canadian manufacturers

09205

Lockheed Martin Corp Electronics and Missiles Div

U.s./canadian manufacturers

54308

Altec Hiline, Llc Div Altec Hiline

Non-manufacturers

57682

Tri-Tech Machine Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

95100

Water Commodity

596 - Gaskets, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

194120

Schedule B & Trade

Schedule B

8484-20-0000

Description

mechanical seals

End Use

21180 - Industrial machines, other

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

74920

(NAICS) North American Industrial Classification System

339991

Questions & Answers

1. What is the FSCG of the NSN 5330-01-342-5843?

   The FSCG of the NSN 5330-01-342-5843 is 5330

2. Does the NSN 5330-01-342-5843 have a Schedule B code assigned?

   Yes, the Schedule B code is 8484200000

3. Does NSN 5330-01-342-5843 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5330-01-342-5843 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5330-01-342-5843 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5330-01-342-5843 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Fri, Jul 26, 1991