NSN 25810747

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

bayonet pin connector locking method, 0.969 inches nominal distance between centerlines of mounting facilities parallel to body width, straight shape, external coupling body style, 0.969 inches nominal center to center distance between mounting facilities parallel to height, unable to decode contact position arrangement style.

NSN 5935-01-033-2020 Datasheet

(NSN) National Stock Number

5935-01-033-2020

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-033-2020

Requires Demilitarization

Yes

(INC) Item Name Code

61925

Date

Fri, Dec 31, 1976

Schedule B Code

8538907080

Body Style

straight shape, external coupling

Center To Center Distance Between Mounting Facilities Parallel To Height

0.969 inches nominal

Connector Locking Method

bayonet pin

Contact Position Arrangement Style

unable to decode

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.969 inches nominal

Distance From Mounting Shoulder To Front Face

0.855 inches minimum and 0.860 inches maximum

Environmental Protection

moisture resistant and vibration resistant and salt water resistant

Insert Position In Deg

0.0

Mating End Quantity

1

Overall Height

1.209 inches minimum and 1.230 inches maximum

Overall Length

1.016 inches maximum

Overall Width

1.209 inches minimum and 1.230 inches maximum

Polarization Method

keyway or multiple keyway

Shell Material

aluminum alloy

Shell Surface Treatment

nickel

Shell Type

solid

Unthreaded Mounting Hole Diameter

0.120 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0061925

Cross Reference

CAGE Codes

35351

Ge Aviation Systems Llc

U.s./canadian manufacturers

K1156

Bae Systems Integrated System Technologies Ltd

Non-us manufacturer (nato), other foreign organization or codification bureaus

77820

Amphenol Corp Div Amphenol Aerospace Operations

U.s./canadian manufacturers

K1100

Amphenol Limited

Non-manufacturers

U4535

Bae Systems Electronics Limited Div Underwater Systems Division

Non-us manufacturer (nato), other foreign organization or codification bureaus

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-033-2020?

   The FSCG of the NSN 5935-01-033-2020 is 5935

2. Does the NSN 5935-01-033-2020 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-033-2020 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-033-2020 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-01-033-2020 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-033-2020 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Fri, Dec 31, 1976