NSN 25826799

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

400.0 single mating end single contact grouping contact maximum ac voltage rating in volts, bayonet latch connector locking method, removable single mating end single contact grouping contact removability, straight shape, internal coupling w/backshell body style, 500.0 single mating end single contact grouping contact maximum dc voltage rating in volts.

NSN 5935-01-077-5357 Datasheet

(NSN) National Stock Number

5935-01-077-5357

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-077-5357

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Fri, May 25, 1979

Schedule B Code

8536695050

Body Style

straight shape, internal coupling w/backshell

Connector Locking Method

bayonet latch

Contact Removability

removable single mating end single contact grouping

Contact Maximum Ac Voltage Rating In Volts

400.0 single mating end single contact grouping

Contact Maximum Dc Voltage Rating In Volts

500.0 single mating end single contact grouping

Contact Position Arrangement Style

12-35 single mating end

Contact Surface Treatment

gold single mating end single contact grouping

Environmental Protection

moisture proof and salt water resistant and vibration proof

Included Contact Quantity

22 single mating end single contact grouping

Included Contact Type

round pin single mating end single contact grouping

Insert Material

plastic epoxy single mating end

Insert Position In Deg

75.0

Mating End Quantity

1

Nominal Thread Size

0.688 inches

Overall Diameter

1.016 inches maximum

Overall Length

1.219 inches maximum

Polarization Method

keyway or multiple keyway

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.022 gold grains, troy

Shell Material

aluminum alloy

Shell Surface Treatment

nickel

Shell Type

solid

Terminal Location

back single mating end single contact grouping

Terminal Type

crimp single mating end single contact grouping

Thread Class

2a

Thread Direction

right-hand

Thread Quantity Per Inch

24

Thread Series Designator

unef

Threaded Device Type

back shell

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

K1156

Bae Systems Integrated System Technologies Ltd

Non-us manufacturer (nato), other foreign organization or codification bureaus

77820

Amphenol Corp Div Amphenol Aerospace Operations

U.s./canadian manufacturers

K1100

Amphenol Limited

Non-manufacturers

U4535

Bae Systems Electronics Limited Div Underwater Systems Division

Non-us manufacturer (nato), other foreign organization or codification bureaus

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-01-077-5357?

   The FSCG of the NSN 5935-01-077-5357 is 5935

2. Does the NSN 5935-01-077-5357 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-01-077-5357 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-077-5357 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-077-5357 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-077-5357 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Fri, May 25, 1979