NATO Stock Number
5905-00-195-9458
Sold in multiples of
1 EA
DEMIL
NO
Section Quantity
1
Body Style
Rectangular
Reliability Indicator
Not established
Overall Length
0.715 inches
Terminal Length
0.300 inches
Overall Height
0.375 inches
Overall Width
0.150 inches
Shaft Diameter
0.060 inches
Shaft Length
0.040 inches
Body Length
0.375 inches
Body Width
0.150 inches
Body Height
0.375 inches
Shaft Style
Round, slotted
Actuator Type
Single shaft
Effective Electrical Rotation In Deg Angular Rotation
7920.0
Maximum Starting Torque
5.00 inch-ounces
Maximum Running Torque
5.00 inch-ounces
Center To Center Distance Between Terminals
0.200 inches
Fragility Factor
Moderately delicate
Terminal Location
Rear end
Mounting Method
Terminal
Features Provided
Humidity proof
Cubic Measure
0.021 cubic inches
Electrical Resistance Per Section
10.0 percent, rated amperes c and better flooring
Electrical Resistance Per Section
10.0 kilohms single section
Rotary Actuator Travel In Angular Deg
7920.0
Center To Center Distance Between Center Terminal And Outside Terminal
0.100 inches
Center To Center Distance Between Center Terminal And Outside Terminal
0.100 inches
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
150.0 single section
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-250.0/+250.0 single section
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-250.0 to 250.0 single section
Power Dissipation Rating Per Section In Watts
0.5 7th secondary quality
Power Dissipation Rating Per Section In Watts
0.5 free air single section
Resistance Tolerance Per Section In Percent
-10.0/+10.0 single section
Resistance Tolerance Per Section In Percent
-10.0 to 10.0 single section
Actuator Travel Control Feature
Clutch
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
85.0 single section
Standard Taper Curve Per Section
A single section
Test Data Document
06424-2605700 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity
3 pin