NSN 267-1012P16

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

white color, as mod by color departure from cited document, flexible flexibility, flame resistant and mildew resistant and oil resistant environmental protection, 800.0 volts per mil /0.001 inch/ dielectric material voltage rating per unit thickness.

NSN 5970-00-683-4574 Datasheet

(NSN) National Stock Number

5970-00-683-4574

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5970 - Electrical Insulators and Insulating Materials

(NIIN) National Item Identification Number

00-683-4574

Requires Demilitarization

Yes

(INC) Item Name Code

00867

Date

Tue, Jan 1, 1963

Schedule B Code

8546900000

Color

white

Departure From Cited Document

as mod by color

Dielectric Material Voltage Rating Per Unit Thickness

800.0 volts per mil /0.001 inch/

Environmental Protection

flame resistant and mildew resistant and oil resistant

Flexibility

flexible

Inside Diameter

0.051 inches minimum and 0.061 inches maximum

Minimum Tensile Strength

1800 pounds per square inch

Nondefinitive Spec/Std Data

1 category and i class and u form and a grade and 16awg size and ua subform and f type

Reliability Indicator

not established

Style Designator

nonshrinkable

Temp Rating

-30.0 celsius and 75.0 celsius

Wall Thickness

0.013 inches minimum and 0.019 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000867

Cross Reference

CAGE Codes

3B150

Raytheon Company Dba Raytheon Co

U.s./canadian manufacturers

49956

Raytheon Company Div Corp

U.s./canadian manufacturers

54X10

Raytheon Company

U.s./canadian manufacturers

80020

Naval Air Warfare Center Aircraft Division Joint Base Jbmdl

U.s./canadian manufacturers

18876

Us Army Aviation and Missile Command

Government departments or units, including military organizations

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

53360

Water Commodity

743 - Electrical cable

National Motor Freight Classification Item Number

103300

Schedule B & Trade

Schedule B

8546-90-0000

Description

electrical insulators, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77324

(NAICS) North American Industrial Classification System

335932

Questions & Answers

1. What is the FSCG of the NSN 5970-00-683-4574?

   The FSCG of the NSN 5970-00-683-4574 is 5970

2. Does the NSN 5970-00-683-4574 have a Schedule B code assigned?

   Yes, the Schedule B code is 8546900000

3. Does NSN 5970-00-683-4574 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5970-00-683-4574 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5970-00-683-4574 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5970-00-683-4574 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963