NSN 2733740

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

countersunk features provided, 1.500 inches nominal diameter, threaded end countersink location, 0.050 inches nominal countersink depth, 45.0 countersink angle in deg.

NSN 5365-01-020-5070 Datasheet

(NSN) National Stock Number

5365-01-020-5070

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5365 - Bushings, Rings, Shims and Spacers

(NIIN) National Item Identification Number

01-020-5070

Requires Demilitarization

Yes

(INC) Item Name Code

18019

Date

Fri, Apr 30, 1976

Countersink Angle In Deg

45.0

Countersink Depth

0.050 inches nominal

Countersink Location

threaded end

Diameter

1.500 inches nominal

Features Provided

countersunk

Hole Inside Diameter

1.151 inches minimum and 1.161 inches maximum

Material Document And Classification

qq-a-225/9, t7351 fed spec single material response

Material

aluminum alloy 7075

Nominal Thread Size

1.625 inches

Overall Length

0.610 inches minimum

Screw Thread Length

0.470 inches nominal

Slot Depth

0.110 inches minimum and 0.140 inches maximum

Slot Width

0.250 inches nominal

Surface Treatment Document And Classification

mil-a-8625 mil spec single treatment response

Surface Treatment

anodize

Thread Direction

right-hand

Thread Quantity Per Inch

12

Thread Series Designator

unified national joint (unj)

Wrenching Facility Shape

face spanner

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0018019

Cross Reference

CAGE Codes

59211

Parker-Hannifin Corporation Div Services and Support Operations

U.s./canadian manufacturers

82106

Parker-Hannifin Corporation Dba Control Systems Division

U.s./canadian manufacturers

92003

Parker Hannifin Corporation Div Aerospace Group Headquarters

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

58860

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

114840

Questions & Answers

1. What is the FSCG of the NSN 5365-01-020-5070?

   The FSCG of the NSN 5365-01-020-5070 is 5365

2. Does NSN 5365-01-020-5070 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5365-01-020-5070 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5365-01-020-5070 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 5365-01-020-5070 was assigned to the Federal Catalog?

   It was assigned 50 years ago, on Fri, Apr 30, 1976