NSN 274-340

A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.

two conductor, turret tip single finger accommodated finger type, 0.250 inches nominal cable entrance diameter, 0.250 inches nominal single finger finger accommodation diameter, j16 jack contact arrangement designator, in-line straight body style.

NSN 5935-01-294-0794 Datasheet

(NSN) National Stock Number

5935-01-294-0794

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-294-0794

Requires Demilitarization

Yes

(INC) Item Name Code

00124

Date

Fri, Feb 10, 1989

Schedule B Code

8517700000

Accommodated Finger Type

two conductor, turret tip single finger

Body Style

in-line straight

Cable Entrance Diameter

0.250 inches nominal

Finger Accommodation Diameter

0.250 inches nominal single finger

Jack Contact Arrangement Designator

j16

Material

plastic body

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000124

Cross Reference

CAGE Codes

62676

Radioshack Corporation Dba Radioshack

U.s./canadian manufacturers

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 5935-01-294-0794?

   The FSCG of the NSN 5935-01-294-0794 is 5935

2. Does the NSN 5935-01-294-0794 have a Schedule B code assigned?

   Yes, the Schedule B code is 8517700000

3. Does NSN 5935-01-294-0794 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-294-0794 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-01-294-0794 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-294-0794 was assigned to the Federal Catalog?

   It was assigned 37 years ago, on Fri, Feb 10, 1989