NSN 280126F4C

A capacitor whose capacitance value cannot be adjusted or varied having paper, plastic, or any combination of paper and plastic as the dielectric material with a metallic film deposited thereon. It may be a single unit or consist of two or more units which cannot be separated.

50.0 milliamperes resistive load lowest ac voltage rating at sea level contact load current rating, 115.0 lowest ac voltage rating at sea level contact voltage rating in volts, breaks before makes each section rear contact switching action, 500.0 milliamperes resistive load and 50.0 milliamperes inductive load dc at sea level contact load current rating, 225.0 milliamperes resistive load highest ac voltage rating at sea level contact load current rating.

NSN 5930-00-524-1376 Datasheet

(NSN) National Stock Number

5930-00-524-1376

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-524-1376

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Fri, Aug 23, 1974

Schedule B Code

8536509025

Contact Load Current Rating

50.0 milliamperes resistive load lowest ac voltage rating at sea level

Contact Load Current Rating

500.0 milliamperes resistive load and 50.0 milliamperes inductive load dc at sea level

Contact Load Current Rating

225.0 milliamperes resistive load highest ac voltage rating at sea level

Contact Switching Action

breaks before makes each section rear

Contact Voltage Rating In Volts

115.0 lowest ac voltage rating at sea level

Contact Voltage Rating In Volts

28.0 dc at sea level

Contact Voltage Rating In Volts

300.0 highest ac voltage rating at sea level

Detent Rotational Torque Range

+1.000 to 6.000 inch-pounds single actuator

First Flat Length

0.265 inches minimum and 0.280 inches maximum single actuator

Flat Height

0.211 inches minimum and 0.221 inches maximum single actuator

Individual Section Quantity

4

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Nonturn Device Radius

0.531 inches nominal at 3:00 oclock

Nonturn Device Type

tab at 3:00 oclock

Operating Temp Range

-65.0 to 85.0 celsius

Overall Height

1.380 inches maximum

Overall Length

2.390 inches maximum

Overall Width

1.300 inches maximum

Pole Quantity

1 each section rear

Shaft Diameter

0.247 inches minimum and 0.250 inches maximum single actuator

Shaft Flat/Slot Angular Location

0.0 degrees from nonturn device single actuator

Shaft Type

round, flatted single actuator

Shaft Length

0.735 inches minimum and 0.765 inches maximum single actuator

Style Designator

circular wafer, bushing mount

Switch Actuator Indexing Position Quantity

7 single actuator

Switch Actuator Positioning Increment

30.0 degrees single actuator

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Test Data Document

"81349-mil-s-3786 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2a single mounting facility

Thread Length

0.365 inches minimum and 0.380 inches maximum single mounting facility

Thread Series Designator

unef single mounting facility

Throw Quantity

7 each section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

76854

Electro Switch Corp. Dba Oak Grisgsby Div Electroswitch

U.s./canadian manufacturers

3B150

Raytheon Company Dba Raytheon Co

U.s./canadian manufacturers

49956

Raytheon Company Div Corp

U.s./canadian manufacturers

54X10

Raytheon Company

U.s./canadian manufacturers

71590

Crl Components Inc

U.s./canadian manufacturers

79692

Electro Switch Corp Div Electroswitch

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9025

Description

switches, rotary, rated at over 5 a, for a voltage not exceeding 1,000 volts

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-524-1376?

   The FSCG of the NSN 5930-00-524-1376 is 5930

2. Does the NSN 5930-00-524-1376 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509025

3. Does NSN 5930-00-524-1376 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-524-1376 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-524-1376 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-524-1376 was assigned to the Federal Catalog?

   It was assigned 52 years ago, on Fri, Aug 23, 1974