NSN 282-1017P2

A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.

1.856 inches minimum and 1.894 inches maximum center to center distance between outside mounting holes along width, 1.856 inches minimum and 1.894 inches maximum body mounting hole accommodation diameter, top mount w/saddle body style, 1.856 inches minimum and 1.894 inches maximum center to center distance between outside mounting holes along length, 4 accommodated contact quantity.

NSN 5935-00-503-6137 Datasheet

(NSN) National Stock Number

5935-00-503-6137

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-503-6137

Requires Demilitarization

Yes

(INC) Item Name Code

28914

Date

Tue, Jan 1, 1963

Schedule B Code

8536695050

Accommodated Contact Quantity

4

Body Mounting Hole Accommodation Diameter

1.856 inches minimum and 1.894 inches maximum

Body Style

top mount w/saddle

Center To Center Distance Between Outside Mounting Holes Along Length

1.856 inches minimum and 1.894 inches maximum

Center To Center Distance Between Outside Mounting Holes Along Width

1.856 inches minimum and 1.894 inches maximum

Contact Position Arrangement Style

circular

Fabrication Method

molded

Mounting Hole Diameter

0.162 inches minimum and 0.186 inches maximum

Mounting Method

saddle

Mounting Hole Style

round, w/four mounting holes/slots

Mounting Type For Which Designed

chassis

Overall Height

0.626 inches minimum and 0.750 inches maximum

Overall Length

2.572 inches minimum and 2.678 inches maximum

Overall Width

2.572 inches minimum and 2.678 inches maximum

Precious Material And Location

contact surface silver

Precious Material

silver

Projection Length Below Mounting Surface

0.656 inches nominal

Specific Equipment Accommodated

electron tube

Terminal Type And Quantity

4 tab, solder lug

Body Material

unable to decode

Body Surface Treatment

unable to decode

Contact Material

unable to decode

Contact Surface Treatment

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0028914

Cross Reference

CAGE Codes

74970

Viking Technologies, Ltd.

U.s./canadian manufacturers

53711

Naval Sea Systems Command

U.s./canadian manufacturers

79500

Westinghouse Electric Corp

U.s./canadian manufacturers

97942

Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Northrop Grumman Systems Corporation Electronic Systems

U.s./canadian manufacturers

11530

Lockheed Martin Corporation Div Lockheed Martin Information Systems & Global Solutions

U.s./canadian manufacturers

49956

Raytheon Company Div Corp

U.s./canadian manufacturers

18876

Us Army Aviation and Missile Command

Government departments or units, including military organizations

19204

Army, United States Department of the Dba Rock Island Arsenal Jmtc

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-00-503-6137?

   The FSCG of the NSN 5935-00-503-6137 is 5935

2. Does the NSN 5935-00-503-6137 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-00-503-6137 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-503-6137 contain precious materials?

   Item contains silver.

5. Does NSN 5935-00-503-6137 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-503-6137 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963