NSN 2T700

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

round pin single mating end single contact grouping included contact type, removable single mating end single contact grouping contact removability, copper alloy single mating end single contact grouping contact material, nonstd single mating end contact position arrangement style, 1 single mating end single contact grouping included contact quantity.

NSN 5935-00-018-9381 Datasheet

(NSN) National Stock Number

5935-00-018-9381

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-018-9381

Requires Demilitarization

Yes

(INC) Item Name Code

15094

Date

Sat, Apr 22, 1967

Schedule B Code

8548900100

Contact Material

copper alloy single mating end single contact grouping

Contact Position Arrangement Style

nonstd single mating end

Contact Removability

removable single mating end single contact grouping

Included Contact Quantity

1 single mating end single contact grouping

Included Contact Type

round pin single mating end single contact grouping

Mating End Quantity

1

Nominal Thread Size

0.438 inches

Overall Diameter

0.625 inches nominal

Overall Length

0.719 inches nominal

Shell Material

copper alloy

Shell Type

solid

Special Features

contact desnation tnc

Thread Class

2b

Thread Direction

right-hand

Thread Quantity Per Inch

28

Thread Series Designator

unef

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015094

Cross Reference

CAGE Codes

94375

Lax Electronics, Inc. Dba Automatic Connector Div Automatic Connector

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Questions & Answers

1. What is the FSCG of the NSN 5935-00-018-9381?

   The FSCG of the NSN 5935-00-018-9381 is 5935

2. Does the NSN 5935-00-018-9381 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5935-00-018-9381 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-018-9381 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-00-018-9381 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-018-9381 was assigned to the Federal Catalog?

   It was assigned 59 years ago, on Sat, Apr 22, 1967