NSN 3015C

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

contact twistlock connector locking method, copper alloy single mating end all contact groupings contact material, locking plug/socket type body style, 0.591 inches minimum and 1.150 inches maximum cable entrance diameter, cable clamp connector cable strain relief method.

NSN 5935-01-372-9525 Datasheet

(NSN) National Stock Number

5935-01-372-9525

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-372-9525

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Tue, Mar 23, 1993

Schedule B Code

8536695050

Body Style

locking plug/socket type

Cable Entrance Diameter

0.591 inches minimum and 1.150 inches maximum

Connector Cable Strain Relief Method

cable clamp

Connector Locking Method

contact twistlock

Contact Material

copper alloy single mating end all contact groupings

Contact Maximum Ac Voltage Rating In Volts

120.0 single mating end all contact groupings

Contact Position Arrangement Style

l15-30 single mating end

Contact Removability

nonremovable single mating end all contact groupings

Contact Removability

nonremovable single mating end second contact grouping

Contact Maximum Current Rating In Amps

30.0 single mating end all contact groupings

Contact Maximum Dc Voltage Rating In Volts

250.0 single mating end all contact groupings

Included Contact Quantity

1 single mating end first contact grouping

Included Contact Quantity

3 single mating end second contact grouping

Included Contact Type

curved socket single mating end second contact grouping

Included Contact Type

curved socket w/inside lip single mating end first contact grouping

Insert Material

plastic polyamide nylon single mating end

Mating End Quantity

1

Overall Diameter

2.220 inches nominal

Overall Height

3.840 inches nominal

Polarization Method

contact

Terminal Location

back single mating end all contact groupings

Terminal Type

screw single mating end all contact groupings

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

11243

Cosmodyne, Llc Dba Cosmodyne Llc

Non-manufacturers

0MT89

Marine Industries Co Dba Marinco

U.s./canadian manufacturers

1G3R2

Marinco Shore Power Systems

U.s./canadian manufacturers

98278

Te Connectivity Corporation Dba Microdot Products

U.s./canadian manufacturers

74545

Hubbell Incorporated (delaware) Dba Wiring Device-Kellems Division

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-01-372-9525?

   The FSCG of the NSN 5935-01-372-9525 is 5935

2. Does the NSN 5935-01-372-9525 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-01-372-9525 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-372-9525 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5935-01-372-9525 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-372-9525 was assigned to the Federal Catalog?

   It was assigned 33 years ago, on Tue, Mar 23, 1993