NSN 3089-3-9

A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a filter, fluid (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes:filter element, air conditioning. See also strainer element, sediment.

internally threaded coupling nut connector locking method, straight shape, internal coupling body style, nonstd single mating end contact position arrangement style, copper alloy single mating end single contact grouping contact material, compression nut connector cable strain relief method.

NSN 5935-01-009-2960 Datasheet

(NSN) National Stock Number

5935-01-009-2960

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-009-2960

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Sun, Sep 7, 1975

Schedule B Code

8536695050

Body Style

straight shape, internal coupling

Connector Cable Strain Relief Method

compression nut

Connector Locking Method

internally threaded coupling nut

Contact Material

copper alloy single mating end single contact grouping

Contact Position Arrangement Style

nonstd single mating end

Contact Removability

nonremovable single mating end single contact grouping

Contact Maximum Frequency Rating

18000.0 megahertz single mating end single contact grouping

Contact Surface Treatment

gold single mating end single contact grouping

Environmental Protection

shock resistant and vibration resistant

Included Contact Quantity

1 single mating end single contact grouping

Included Contact Type

coaxial pin single mating end single contact grouping

Insert Material

plastic tetrafluoroethylene single mating end

Mating End Quantity

1

Nominal Thread Size

0.250 inches

Overall Diameter

0.312 inches nominal

Overall Length

1.375 inches maximum

Precious Material And Location

contact surface gold

Precious Material

gold

Precious Material And Weight

0.005 gold grains, troy

Radio Frequency Type Contact Characteristic Impedance In Ohms

50.0 single mating end single contact grouping

Shell Material

steel corrosion resisting

Shell Surface Treatment

passivate

Shell Type

solid

Special Features

contact designation sma

Terminal Location

back single mating end single contact grouping

Terminal Type

crimp single mating end single contact grouping

Thread Class

2b

Thread Direction

right-hand

Thread Quantity Per Inch

36

Thread Series Designator

uns

Threaded Device Type

coupling facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

58167

Palco Connector Inc.

U.s./canadian manufacturers

26805

Tyco Electronics Corp

U.s./canadian manufacturers

00779

Te Connectivity Corporation

U.s./canadian manufacturers

21845

Solitron Devices, Inc.

U.s./canadian manufacturers

95077

Sv Microwave, Inc. Div Sv Microwave

U.s./canadian manufacturers

66702

Coaxial Components Corp. Dba Coaxial Components Corp

U.s./canadian manufacturers

98291

Itt Cannon Rf Products

U.s./canadian manufacturers

53711

Naval Sea Systems Command

U.s./canadian manufacturers

91836

Winchester Interconnect Corporation

U.s./canadian manufacturers

74868

Amphenol Corporation Div Amphenol Rf

U.s./canadian manufacturers

80063

Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-01-009-2960?

   The FSCG of the NSN 5935-01-009-2960 is 5935

2. Does the NSN 5935-01-009-2960 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-01-009-2960 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-009-2960 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-009-2960 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-009-2960 was assigned to the Federal Catalog?

   It was assigned 51 years ago, on Sun, Sep 7, 1975