NSN 313532

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

right-hand thread direction, 24 thread quantity per inch, "shcs, gr5 nylock mil-f18240 number 10-24x1/2"" part name assigned by controlling agency, 0.5 inches nominal fastener length, 0.190 inches nominal thread diameter.

NSN 5305-01-630-1845 Datasheet

(NSN) National Stock Number

5305-01-630-1845

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5305 - Screws

(NIIN) National Item Identification Number

01-630-1845

Requires Demilitarization

Yes

(INC) Item Name Code

16282

Date

Mon, Jul 28, 2014

Fastener Length

0.5 inches nominal

Part Name Assigned By Controlling Agency

"shcs, gr5 nylock mil-f18240 number 10-24x1/2""

Nominal Thread Diameter

0.190 inches

Thread Direction

right-hand

Thread Quantity Per Inch

24

Thread Series Designator

unified national coarse (unc)

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0016282

Cross Reference

CAGE Codes

90099

Northrop Grumman Systems Corporation Div Marine Systems

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

50600

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

096640

Questions & Answers

1. What is the FSCG of the NSN 5305-01-630-1845?

   The FSCG of the NSN 5305-01-630-1845 is 5305

2. Does NSN 5305-01-630-1845 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5305-01-630-1845 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5305-01-630-1845 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 5305-01-630-1845 was assigned to the Federal Catalog?

   It was assigned 12 years ago, on Mon, Jul 28, 2014