1. Home /
  2. FSC NSN Catalog /
  3. Commercial Hardware /
  4. 3192T59

NSN 3192T59

Pipe Hanger

A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see gearshaft (as modified). For items designed to support rotating members see axle(1), straight. For items not having the above conditions see pin, straight, headless. For items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.

4.000 inches nominal pipe accommodation diameter, plastic material, clamp,plastic,for pipe/rigid conduit,size:4.000 inches part name assigned by controlling agency, outside dieameter:4.500 in;length:7.500 in;width:1.312 in;mounting hole diameter:0.375 in;distance between mounting holes:6.500 in special features, 1 conduit supported item and quantity.

NSN 5340-01-574-8042 Datasheet

(NSN) National Stock Number
5340-01-574-8042
(FSG) Federal Supply Group
53 - Hardware and Abrasives
(FSC) Federal Supply Classification
5340 - Commercial Hardware
(NIIN) National Item Identification Number
01-574-8042
Requires Demilitarization
Yes
(INC) Item Name Code
42764
Date
Wed, Jun 10, 2009
Material
plastic
Part Name Assigned By Controlling Agency
clamp,plastic,for pipe/rigid conduit,size:4.000 inches
Pipe Accommodation Diameter
4.000 inches nominal
Special Features
outside dieameter:4.500 in;length:7.500 in;width:1.312 in;mounting hole diameter:0.375 in;distance between mounting holes:6.500 in
Supported Item And Quantity
1 conduit

Identification

Demilitarization Code
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Precious Metals Indicator
A - Item does not contain precious metal.
Hazardous Metals Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Pseudo Item Name Code
0042764

Cross Reference

CAGE Codes

39428
Mcmaster-Carr Supply Co
Non-manufacturers

Freight Information

Air Commodity
BZ -
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
National Motor Freight Class Rating
U - 50.0
Special Handling
9 - Other or no special handling required (sh)
Type of Cargo
Z - No special type of cargo code applicable
Uniform Freight Classification Item Number
54290
Water Commodity
736 - Plumbing supplies
National Motor Freight Classification Item Number
105500

Questions & Answers

  1. What is the FSCG of the NSN 5340-01-574-8042?

    The FSCG of the NSN 5340-01-574-8042 is 5340

  2. Does NSN 5340-01-574-8042 require demilitarization?

    Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

  3. Does NSN 5340-01-574-8042 contain precious materials?

    Item does not contain precious metal.

  4. Does NSN 5340-01-574-8042 contain hazardous materials?

    Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

  5. When the NSN 5340-01-574-8042 was assigned to the Federal Catalog?

    It was assigned 17 years ago, on Wed, Jun 10, 2009

Globe Transparent
Get in Touch
Looking for technical parts, product details, or custom project planning? Our team has you covered with end-to-end support every step of the way.
Contact Us

Pricing & Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.