NSN 325485

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

unable to decode center to center distance between mounting facilities parallel to width, 0.546 inches maximum body length, 0.546 inches maximum body height, unable to decode center to center distance between mounting facilities parallel to length, 0.468 inches maximum body width.

NSN 5950-01-328-4591 Datasheet

(NSN) National Stock Number

5950-01-328-4591

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

01-328-4591

Requires Demilitarization

Yes

(INC) Item Name Code

00780

Date

Thu, Nov 1, 1990

Schedule B Code

8548900100

Body Height

0.546 inches maximum

Body Length

0.546 inches maximum

Body Width

0.468 inches maximum

Center To Center Distance Between Mounting Facilities Parallel To Width

unable to decode

Center To Center Distance Between Mounting Facilities Parallel To Length

unable to decode

Frequency Rating

Impedance Rating In Ohms

unable to decode

Inclosure Type

fully inclosed

Maximum Operating Temp

85.0 celsius

Maximum Transformer Power Rating

unable to decode

Mounting Facility Quantity

unable to decode

Mounting Hole Diameter

Mounting Method

unable to decode

Reliability Indicator

not established

Terminal Type And Quantity

4 pin

Winding Function And Quantity

Winding Operating Current

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000780

Cross Reference

CAGE Codes

37695

Raytheon Company

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-01-328-4591?

   The FSCG of the NSN 5950-01-328-4591 is 5950

2. Does the NSN 5950-01-328-4591 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5950-01-328-4591 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-01-328-4591 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5950-01-328-4591 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-01-328-4591 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Thu, Nov 1, 1990