NSN 33006LD

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

5.0 amperes resistive load ac at sea level contact load current rating, 6 individual section quantity, breaks before makes each section rear contact switching action, actuator knob features provided, 125.0 ac at sea level contact voltage rating in volts.

NSN 5930-00-779-0871 Datasheet

(NSN) National Stock Number

5930-00-779-0871

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-779-0871

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Mon, Jan 1, 1962

Schedule B Code

8536509020

Contact Load Current Rating

5.0 amperes resistive load ac at sea level

Contact Switching Action

breaks before makes each section rear

Contact Voltage Rating In Volts

125.0 ac at sea level

Features Provided

actuator knob

Individual Section Quantity

6

Knob Manufacturer Code

82121

Knob Manufacturer Part Number

74000-2

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.469 inches single mounting facility

Overall Diameter

2.000 inches nominal

Overall Length

5.157 inches nominal

Pole Quantity

1 each section rear

Precious Material And Location

contact surfaces silver

Precious Material

silver

Shaft Diameter

0.250 inches nominal single actuator

Shaft Length

1.875 inches nominal single actuator

Shaft Type

round single actuator

Style Designator

tap, circular, bushing mount

Switch Actuator Indexing Position Quantity

7 single actuator

Switch Actuator Positioning Increment

45.0 degrees single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

screw

Thread Class

2a single mounting facility

Thread Length

0.469 inches nominal single mounting facility

Thread Quantity Per Inch

32 single mounting facility

Thread Series Designator

uns single mounting facility

Throw Quantity

7 each section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

82121

Electro Switch Corp. Dba Electro Switch Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-779-0871?

   The FSCG of the NSN 5930-00-779-0871 is 5930

2. Does the NSN 5930-00-779-0871 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-00-779-0871 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-779-0871 contain precious materials?

   Item contains silver.

5. Does NSN 5930-00-779-0871 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-779-0871 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962