NSN 331C170H01

An item fabricated from electrically nonconductive material specifically designed to provide a support for mounting an electrical and/or an electronic component such as a semiconductor device, relay, or resistor into the next higher assembly. It isolates the component from the mounting surface of the next higher assembly, it may act as a strain relief to avoid damage to the component seal, and it may permit soldering of the component to the next higher assembly without damage. It includes holes, notches, or other provisions for physical alignment and spacing of electrical leads and/or other mounting facilities projecting from the component it mounts. It may also afford protection from shock or vibration. It may be either nonthermally conductive which protects the component from temperature changes in the next higher assembly or it may be thermally conductive which permits heat generated in the component to be drained out to a heat sink. For items whose function is electrical insulation only, see insulator, (as modified). Excludes:holder, (as modified); retainer, (as modified), and spacer, plate.

breaks before makes single section rear contact switching action, 1.0 amperes resistive load ac at sea level contact load current rating, 2.0 amperes resistive load dc at sea level contact load current rating, 28.0 dc at sea level contact voltage rating in volts, 110.0 ac at sea level contact voltage rating in volts.

NSN 5930-00-686-0035 Datasheet

(NSN) National Stock Number

5930-00-686-0035

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-686-0035

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Tue, Jan 1, 1963

Schedule B Code

8536509020

Contact Load Current Rating

1.0 amperes resistive load ac at sea level

Contact Load Current Rating

2.0 amperes resistive load dc at sea level

Contact Switching Action

breaks before makes single section rear

Contact Voltage Rating In Volts

110.0 ac at sea level

Contact Voltage Rating In Volts

28.0 dc at sea level

First Flat Length

0.438 inches nominal single actuator

Flat Height

0.213 inches minimum and 0.223 inches maximum single actuator

Individual Section Quantity

1

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Nonturn Device Radius

0.531 inches nominal at 3:00 oclock

Nonturn Device Type

tab at 3:00 oclock

Overall Height

1.312 inches nominal

Overall Length

1.687 inches nominal

Overall Width

1.250 inches nominal

Pole Quantity

1 single section rear

Shaft Diameter

0.248 inches minimum and 0.250 inches maximum single actuator

Shaft Flat/Slot Angular Location

65.0 degrees from nonturn device single actuator

Shaft Type

round, flatted single actuator

Shaft Length

0.875 inches nominal single actuator

Style Designator

circular wafer, bushing mount

Switch Actuator Indexing Position Quantity

2 single actuator

Switch Actuator Positioning Increment

60.0 degrees single actuator

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Test Data Document

89661-331c170h01 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Thread Class

2a single mounting facility

Thread Length

0.375 inches nominal single mounting facility

Thread Series Designator

unef single mounting facility

Throw Quantity

2 single section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

SMS - Defense logistics agency, enterprise business systems

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

76854

Electro Switch Corp. Dba Oak Grisgsby Div Electroswitch

U.s./canadian manufacturers

79500

Westinghouse Electric Corp

U.s./canadian manufacturers

97942

Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Northrop Grumman Systems Corporation Electronic Systems

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-686-0035?

   The FSCG of the NSN 5930-00-686-0035 is 5930

2. Does the NSN 5930-00-686-0035 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-00-686-0035 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-686-0035 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-686-0035 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-686-0035 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963