NSN 341047D

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

3.562 inches minimum and 4.031 inches maximum attachment feature length, 0.594 inches nominal body height, bead chain furnished items, qq-b-626,1/2 hard fed spec single material response material document and classification, 0.190 inches nominal eye inside diameter.

NSN 5935-01-051-9703 Datasheet

(NSN) National Stock Number

5935-01-051-9703

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-051-9703

Requires Demilitarization

Yes

(INC) Item Name Code

15076

Date

Thu, Dec 8, 1977

Schedule B Code

8538907080

Attachment Feature Length

3.562 inches minimum and 4.031 inches maximum

Body Height

0.594 inches nominal

Eye Inside Diameter

0.190 inches nominal

Furnished Items

bead chain

Material Document And Classification

qq-b-626,1/2 hard fed spec single material response

Material

copper alloy

Mounting Facility Type And Quantity

1 threaded coupling

Nominal Thread Size

1.750 inches

Overall Diameter

2.000 inches nominal

Precious Material And Location

cover surface silver

Style Designator

internal thread w/chain or rope

Surface Treatment Document And Classification

qq-s-365 type @i,grade b fed spec single treatment response

Surface Treatment

silver

Thread Class

2b

Thread Direction

right-hand

Thread Quantity Per Inch

5

Thread Series Designator

double stub

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015076

Cross Reference

CAGE Codes

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

56232

Lockheed Martin Corporation Div Rms - Mitchel Field

Non-manufacturers

52196

Caton Connector Corporation Dba Caton Connector Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-051-9703?

   The FSCG of the NSN 5935-01-051-9703 is 5935

2. Does the NSN 5935-01-051-9703 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-051-9703 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-051-9703 contain precious materials?

   Item contains silver.

5. Does NSN 5935-01-051-9703 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-051-9703 was assigned to the Federal Catalog?

   It was assigned 48 years ago, on Thu, Dec 8, 1977