NSN 34D921

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

0.250 microfarads single section capacitance value per section, plain foil anode type, 41.3 millimeters maximum body length, w/o mtg facilities, axial terminals body style, 13.1 millimeters maximum body diameter.

NSN 5910-01-133-1084 Datasheet

(NSN) National Stock Number

5910-01-133-1084

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-133-1084

Requires Demilitarization

Yes

(INC) Item Name Code

00008

Date

Wed, Jun 9, 1982

Schedule B Code

8532290040

Anode Type

plain foil

Body Diameter

13.1 millimeters maximum

Body Length

41.3 millimeters maximum

Body Style

w/o mtg facilities, axial terminals

Capacitance Value Per Section

0.250 microfarads single section

Capacitive Electrode Material

aluminum

Case Insulation Material

plastic

Electrical Polarization

polarized

Nonderated Operating Temp

-40.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

50.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Diameter

0.040 inches nominal

Terminal Length

63.5 millimeters maximum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Range Per Section

-10.00 to 75.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000008

Cross Reference

CAGE Codes

06434

Lorain Electronics Corp

U.s./canadian manufacturers

56289

Sprague Electric Co World Hqs

U.s./canadian manufacturers

0P569

B. Microfarads, Inc. Dba Barker Microfarads

Non-manufacturers

59661

Syntegra / Usa/ Inc Computer Parts and Supplies Arh205

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-133-1084?

   The FSCG of the NSN 5910-01-133-1084 is 5910

2. Does the NSN 5910-01-133-1084 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-133-1084 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-133-1084 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-133-1084 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-133-1084 was assigned to the Federal Catalog?

   It was assigned 44 years ago, on Wed, Jun 9, 1982