NSN 3694591050

An item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) a one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) a one-piece item with both ends processed for terminations, excluding threaded end(s); (3) a two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) a three-piece construction type item consisting of a body and two end attachments. Excludes:internal combustion engine type piston connecting rods; drag link, steering; link, anchor, brake shoe; tie rod, steering; and turnbuckle. For cylindrical shaped externally threaded items without end attachments, see rod, threaded end and stud (as modified).

straight shape, external coupling body style, 20.62 millimeters minimum and 23.01 millimeters maximum distance between centerlines of mounting facilities parallel to body width, 20.62 millimeters minimum and 23.01 millimeters maximum center to center distance between mounting facilities parallel to height, 20.9 millimeters minimum and 21.4 millimeters maximum distance from mounting shoulder to front face, externally threaded shell connector locking method.

NSN 5935-01-333-0065 Datasheet

(NSN) National Stock Number

5935-01-333-0065

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-333-0065

Requires Demilitarization

Yes

(INC) Item Name Code

15092

Date

Mon, Jan 21, 1991

Schedule B Code

8548900100

Body Style

straight shape, external coupling

Center To Center Distance Between Mounting Facilities Parallel To Height

20.62 millimeters minimum and 23.01 millimeters maximum

Connector Locking Method

externally threaded shell

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

20.62 millimeters minimum and 23.01 millimeters maximum

Distance From Mounting Shoulder To Front Face

20.9 millimeters minimum and 21.4 millimeters maximum

Environmental Protection

moisture proof and salt water resistant and vibration proof and corrosion resistant and dust resistant and fuel resistant and fungus resistant and humidity resistant and oil resistant and shock resistant and thermal shock resistant and vibration resistant

Insert Position In Deg

0.0 and 124.0 and 152.0 and 219.0 and 265.0

Mating End Quantity

1

Nominal Thread Size

0.875 inches

Operating Temp Rating

-65.0 celsius minimum and 175.0 celsius maximum

Overall Height

28.3 millimeters minimum and 28.9 millimeters maximum

Overall Length

23.4 millimeters nominal

Overall Width

28.3 millimeters minimum and 28.9 millimeters maximum

Polarization Method

key, multiple key groove

Shell Surface Treatment Document And Classification

qq-p-416 fed spec single treatment response

Shell Material

aluminum alloy

Shell Type

solid

Specification/Standard Data

81349-mil-c-38999/22 government specification

Test Data Document

"81349-mil-c-38999 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2a

Thread Direction

right-hand

Thread Quantity Per Inch

10

Thread Series Designator

special acme

Threaded Device Type

coupling facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015092

Cross Reference

CAGE Codes

A486G

Nimikkeistokeskus Ncb Finland

Government departments or units, including military organizations

B0897

Fn Herstal Dba Fabrique Nationale Nouvelle Herstal

Non-us manufacturer (nato), other foreign organization or codification bureaus

9009H

Jednolity Indeks Materialowy - Uniform Material Index

Government departments or units, including military organizations

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Questions & Answers

1. What is the FSCG of the NSN 5935-01-333-0065?

   The FSCG of the NSN 5935-01-333-0065 is 5935

2. Does the NSN 5935-01-333-0065 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5935-01-333-0065 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-333-0065 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5935-01-333-0065 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-333-0065 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Mon, Jan 21, 1991