NSN 3722LD

An externally threaded fastener whose threaded portion is of one nominal diameter, no. 10 (0.190 in.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than no. 10 (0.190 in.) (5 mm) and those items with an inserted drive head, use screw, shoulder. For items which are no. 10 (0.190 in.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use bolt, externally relieved body. Excludes:thumbscrew.

unable to decode contact load current rating, 500.0 milliamperes resistive load ac at sea levelunable to decode contact load current rating, breaks before makes each section front contact switching action, 500.0 milliamperes resistive load ac at sea level contact load current rating, 500.0 milliamperes resistive load dc at sea level contact load current rating.

NSN 5930-00-497-0935 Datasheet

(NSN) National Stock Number

5930-00-497-0935

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-497-0935

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Fri, Feb 12, 1971

Schedule B Code

8536509020

Contact Load Current Rating

500.0 milliamperes resistive load dc at sea level

Contact Load Current Rating

500.0 milliamperes resistive load ac at sea level

Contact Load Current Rating

500.0 milliamperes resistive load ac at sea levelunable to decode

Contact Load Current Rating

unable to decode

Contact Switching Action

breaks before makes each section front

Contact Voltage Rating In Volts

125.0 ac at sea level

Contact Voltage Rating In Volts

28.0 dc at sea level

First Flat Length

0.218 inches nominal single actuator

Flat Height

0.216 inches nominal single actuator

Individual Section Quantity

2

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Nonturn Device Type

slotted bushing at 12:00 oclock

Operating Temp Range

-65.0 to 125.0 celsius

Overall Height

1.188 inches maximum

Overall Length

1.968 inches nominal

Overall Width

1.188 inches maximum

Pole Quantity

2 each section rear

Rotor Through Connection Quantity

2 each section

Shaft Diameter

0.250 inches nominal single actuator

Shaft Flat/Slot Angular Location

180.0 degrees from nonturn device single actuator

Shaft Type

round, flatted single actuator

Shaft Length

0.750 inches nominal single actuator

Style Designator

square wafer, panel mount

Switch Actuator Indexing Position Quantity

6 single actuator

Switch Actuator Positioning Increment

30.0 degrees single actuator

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Test Data Document

"81349-mil-s-3786/8 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2a single mounting facility

Thread Length

0.375 inches nominal single mounting facility

Thread Series Designator

unable to decode

Thread Series Designator

unef single mounting facility

Throw Quantity

6 each section front

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

18876

Us Army Aviation and Missile Command

Government departments or units, including military organizations

82121

Electro Switch Corp. Dba Electro Switch Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-497-0935?

   The FSCG of the NSN 5930-00-497-0935 is 5930

2. Does the NSN 5930-00-497-0935 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-00-497-0935 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-497-0935 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-497-0935 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-497-0935 was assigned to the Federal Catalog?

   It was assigned 55 years ago, on Fri, Feb 12, 1971