NSN 380296-1

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

lc-130h aircraft end item identification, aircraft ski system fsc application data, material is annealed corrosion resistant steel,per mil-s-5059,comp 301;length is 2.730 in.;width is 1.780 in.;thickness is 0.125 in.;fabric per lacprocess spec 1241 general characteristics item description.

NSN 1630-01-237-4412 Datasheet

(NSN) National Stock Number

1630-01-237-4412

(FSG) Federal Supply Group

16 - Aerospace Craft Components and Accessories

(FSC) Federal Supply Classification

1630 - Aircraft Wheel and Brake Systems

(NIIN) National Item Identification Number

01-237-4412

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Thu, Jul 31, 1986

Schedule B Code

8803200060

End Item Identification

lc-130h aircraft

Fsc Application Data

aircraft ski system

General Characteristics Item Description

material is annealed corrosion resistant steel,per mil-s-5059,comp 301;length is 2.730 in.;width is 1.780 in.;thickness is 0.125 in.;fabric per lacprocess spec 1241

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1478548

Cross Reference

CAGE Codes

98897

Lockheed Martin Corp Dba Lockheed Martin Aerostructures Div Lockheed Martin Aeronautics Company

U.s./canadian manufacturers

Freight Information

Air Commodity

AZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

Q - 70.0

National Motor Freight Class Rating

Q - 70.0

Special Handling

Z - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

671 - Aircraft parts, to include test/tool sets and equipment (other than armament systems)

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 1630-01-237-4412?

   The FSCG of the NSN 1630-01-237-4412 is 1630

2. Does the NSN 1630-01-237-4412 have a Schedule B code assigned?

   Yes, the Schedule B code is 8803200060

3. Does NSN 1630-01-237-4412 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 1630-01-237-4412 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 1630-01-237-4412 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 1630-01-237-4412 was assigned to the Federal Catalog?

   It was assigned 40 years ago, on Thu, Jul 31, 1986