NATO Stock Number
5930-01-032-1870
Sold in multiples of
1 EA
DEMIL
NO
Thread Class
2a single mounting facility
Thread Length
0.312 inches single mounting facility
Hazardous Locations/environmental Protection
Watertight
Overall Length
1.915 inches
First Flat Length
0.250 inches single actuator
Flat Height
0.094 inches single actuator
Shaft Diameter
0.125 inches single actuator
Shaft Length
0.375 inches single actuator
Overall Diameter
0.781 inches
Nonturn Device Radius
0.260 inches at 3: 00 o'clock
Individual Section Quantity
2
Nonturn Device Type
Tab at 3: 00 o'clock
Operating Tempurature Range
-65.0/+85.0 degrees celsius
End Application
Psupport equipment, t-38 aircraft; aircraft, phantom f-4; aircraft, stratolifter c-135; helicopter, cobra/tow, ah series; helicopter, super jolly h-53; support equipment, t-37 aircraft; aircraft, thunderbolt ii, a-10
Switch Contact Basic Design
Nonpile-up symmetrical
Pole Quantity
4 each section front
Throw Quantity
3 each section rear
Mounting Method
Threaded bushing w/panel seal single mounting facility
Thread Size
0.250 inches single mounting facility
Contact Voltage Rating In Volts
115.0 ac at sea level
Contact Voltage Rating In Volts
28.0 dc at sea level
Shaft Flat/slot Angular Location
195.0 degrees from nonturn device single actuator
Rotor Through Connection Quantity
4 each section
Switch Actuator Indexing Position Quantity
3 single actuator
Shaft Type
Round, flatted single actuator
Criticality Code Justification
Feat
Terminal Type
Tab, solder lug
Contact Switching Action
Breaks before makes each section rear
Switch Actuator Positioning Increment
30.0 degrees single actuator
Switch Actuator Stop Device Type
Fixed-adjustable stops single actuator
Contact Load Current Rating
125.0 milliamperes resistive load dc at sea level
Contact Load Current Rating
75.0 milliamperes resistive load ac at sea level
Precious Material And Location
Contact surface gold and terminal surface gold
Precious Material
Gold
Style Designator
Tap, circular, bushing mount
Thread Series Designator
Unef single mounting facility