NSN 385FD005-2216C

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

3.372 inches nominal distance from centerline to cable end, 90.0 body angle in deg, 0.950 inches minimum cable opening diameter, 1 cable opening quantity, iahhs end item identification.

NSN 5935-01-623-4129 Datasheet

(NSN) National Stock Number

5935-01-623-4129

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-623-4129

Requires Demilitarization

Yes

(INC) Item Name Code

67169

Date

Wed, Nov 13, 2013

Schedule B Code

8548900100

End Item Identification

iahhs

Body Angle In Deg

90.0

Cable Opening Diameter

0.950 inches minimum

Cable Opening Quantity

1

Distance From Centerline To Cable End

3.372 inches nominal

Distance From Centerline To Connector End

1.625 inches nominal

Material

aluminum alloy

Mounting Facility Type And Quantity

1 clamp assembly and 1 threaded coupling

Nominal Thread Size

1.313 inches

Overall Width

2.120 inches nominal

Style Designator

angle type w/clamp

Surface Treatment

cadmium and nickel

Thread Class

2b

Thread Direction

right-hand

Thread Quantity Per Inch

18

Thread Series Designator

unef

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0067169

Cross Reference

CAGE Codes

98752

Warner Robins Air Logistics Center

U.s./canadian manufacturers

06324

Glenair, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

743 - Electrical cable

National Motor Freight Classification Item Number

061680

Questions & Answers

1. What is the FSCG of the NSN 5935-01-623-4129?

   The FSCG of the NSN 5935-01-623-4129 is 5935

2. Does the NSN 5935-01-623-4129 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5935-01-623-4129 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-623-4129 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5935-01-623-4129 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-623-4129 was assigned to the Federal Catalog?

   It was assigned 12 years ago, on Wed, Nov 13, 2013