NSN 3JR2

A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, and the like, shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes:resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.

breaks before makes each section front contact switching action, 125.0 lowest ac voltage rating at sea level contact voltage rating in volts, 250.0 highest ac voltage rating at sea level contact voltage rating in volts, 10.0 amperes resistive load lowest ac voltage rating at sea level contact load current rating, 5.0 amperes resistive load highest ac voltage rating at sea level contact load current rating.

NSN 5930-00-548-3274 Datasheet

(NSN) National Stock Number

5930-00-548-3274

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-548-3274

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Tue, Jan 1, 1963

Schedule B Code

8536509025

Contact Load Current Rating

10.0 amperes resistive load lowest ac voltage rating at sea level

Contact Load Current Rating

5.0 amperes resistive load highest ac voltage rating at sea level

Contact Switching Action

breaks before makes each section front

Contact Voltage Rating In Volts

125.0 lowest ac voltage rating at sea level

Contact Voltage Rating In Volts

250.0 highest ac voltage rating at sea level

Hazardous Locations/Environmental Protection

dustproof

Individual Section Quantity

2

Longest Horizontal Distance Between Mounting Centers

2.312 inches nominal single mounting facility

Longest Vertical Distance Between Mounting Centers

2.312 inches nominal single mounting facility

Mounting Facility Pattern

four position rectangular single mounting facility

Nominal Thread Size

0.190 inches single mounting facility

Pole Quantity

1 each section front

Shaft Diameter

0.375 inches nominal single actuator

Shaft Length

1.188 inches nominal single actuator

Shaft Type

round single actuator

Switch Actuator Indexing Position Quantity

7 single actuator

Switch Actuator Positioning Increment

45.0 degrees single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Thread Quantity Per Inch

24 single mounting facility

Thread Series Designator

unified national coarse (unc) single mounting facility

Throw Quantity

7 each section front

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

82121

Electro Switch Corp. Dba Electro Switch Corp

U.s./canadian manufacturers

71053

States Electronics Corp Bludworth Marine Div

U.s./canadian manufacturers

88818

Kearfott Corporation Div Guidance and Navigation Division

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

723 - Radio parts and equipment, excluding tubes packed separately

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9025

Description

switches, rotary, rated at over 5 a, for a voltage not exceeding 1,000 volts

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-548-3274?

   The FSCG of the NSN 5930-00-548-3274 is 5930

2. Does the NSN 5930-00-548-3274 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509025

3. Does NSN 5930-00-548-3274 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-548-3274 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-548-3274 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-548-3274 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963