NSN 3SR2C3

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

500.0 ac at sea level contact voltage rating in volts, 30.0 amperes resistive load ac at sea level contact load current rating, 250.0 dc at sea level contact voltage rating in volts, 30.0 amperes resistive load dc at sea level contact load current rating, breaks before makes each section front contact switching action.

NSN 5930-00-258-5483 Datasheet

(NSN) National Stock Number

5930-00-258-5483

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-258-5483

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Tue, Jan 1, 1963

Schedule B Code

8536509025

Contact Load Current Rating

30.0 amperes resistive load ac at sea level

Contact Load Current Rating

30.0 amperes resistive load dc at sea level

Contact Switching Action

breaks before makes each section front

Contact Voltage Rating In Volts

250.0 dc at sea level

Contact Voltage Rating In Volts

500.0 ac at sea level

Individual Section Quantity

4

Longest Horizontal Distance Between Mounting Centers

3.812 inches nominal single mounting facility

Mounting Facility Pattern

two position in-line single mounting facility

Mounting Method

base and unthreaded hole(s) single mounting facility

Overall Height

3.688 inches nominal

Overall Length

5.187 inches nominal

Overall Width

4.375 inches nominal

Shaft Diameter

0.375 inches nominal single actuator

Shaft Length

1.562 inches nominal single actuator

Shaft Type

round w/through hole single actuator

Specification/Standard Data

81349-mil-s-15291/7 government specification

Style Designator

tap, circuit selector

Switch Actuator Indexing Position Quantity

4 single actuator

Switch Actuator Positioning Increment

90.0 degrees single actuator

Switch Contact Basic Design

nonpile-up nonsymmetrical

Terminal Type

tab w/screw

Test Data Document

"81349-mil-s-15291 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Unthreaded Mounting Hole Diameter

0.314 inches minimum and 0.317 inches maximum single mounting facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

80064

Naval Ship Systems Command

U.s./canadian manufacturers

82121

Electro Switch Corp. Dba Electro Switch Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9025

Description

switches, rotary, rated at over 5 a, for a voltage not exceeding 1,000 volts

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-258-5483?

   The FSCG of the NSN 5930-00-258-5483 is 5930

2. Does the NSN 5930-00-258-5483 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509025

3. Does NSN 5930-00-258-5483 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-258-5483 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-258-5483 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-258-5483 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963